Dot Hill Systems II 200 FC Determining the Worldwide Name for IBM Servers Running AIX

3.Display the attributes of the new file system.

#df -kmount-point

H.10 Determining the Worldwide Name for IBM Servers Running AIX

Before you can create host filters, you need to know the worldwide name (WWN) for the FC HBA that connects your host to your FC array.

For supported IBM HBAs, perform these steps:

1.Determine the device name by typing the command:

#lscfg grep fc

2.Type the following command:

#lscfg -vldevice-name

Output similar to the following is displayed. The network address is the WWN.

Figure H-2Network Address Corresponding to WWN

H-8SANnet II 200 FC, SATA, and SATA SE Array Installation, Operation, and Service Manual • March 2005