
Conductivity/Resistivity Analyzer/Controller
Table
Menu Item
Purpose
Where
Described
MAINTENANCE
DISPLAY TEST
KEYBOARD TEST
OUTPUT TESTS
OUTPUT CALIBRATION
INSTRUMENT SETUP
INSTRUMENT TAGGING
PRODUCT INFORMATION
do occasional system tasks
[see functions listed below]
test display
test keyboard
test relays and analog outputs
calibrate outputs electrically
[see functions listed below]
configure tagname or other text to be displayed at the top of the screen
view software version and stored model number; if a special technical support password is known, alter model number in memory (in case of hardware upgrades)
Sections 9 and
10
[see below]
9.5.1
9.5.1
9.5.2
10.2
[see below]
10.3
10.4
SCREEN CONTRAST
SECURITY
RESET UNIT
LEAD RESISTANCE COMP [wide range models only]
I/O SETUP
adjust display contrast
assign password to limit access to configuration, calibration, and maintenance functions
reset all configuration and calibration values back to factory settings
specify wire gauge and length when long leads are used; instrument will compensate for these long leads
choose features, make relay and analog output assignments
10.5
10.6
10.7
10.8
5.3
9782 Series Conductivity/Resistivity Analyzer/Controller - Operator’s Manual | 7/99 |