
AutoClean Theory and Piping
7. AutoClean Theory and Piping
7.1 Overview
Introduction
The AutoClean feature periodically rinses the cells automatically as described in this section. To take advantage of this feature you must:
∙Select it during I/O setup (see Section 5).
∙Set the clock, and specify the frequency and duration of the rinse (see Section 5).
∙Wire the relay assigned to this operation during I/O setup to operate the necessary valves. (See Section 6 for relay wiring.)
∙Install piping and valves as diagrammed in this section.
What’s in this section?
The topics in this section are listed below.
Topic
7.1Overview
7.2AutoClean Sequence and Piping
See Page
7/99 | 9782 Series Conductivity/Resistivity Analyzer/Controller - Operator’s Manual |