I/O Setup and System Configuration
Table 5-5 Procedure for Configuring DAT Control
Step
1
Screen
MENU
CONFIGURATION
CALIBRATION
MAINTENANCE
I/O SETUP
DIAGNOSTICS
PREV NEXT
Action
Go to CONFIGURATION DISCRETE CONTROL DAT.
2
3
CONFIGURATION
CAT/RETRANSMISSION
ALARMS
DISCRETE CONTROL
ADVANCED FEATURES
DIAGNOSTICS
PREV NEXT
DISCRETE CONTROL
ON/OFF
PFT
DAT
DIAGNOSTICS
|
|
| ||
|
|
| ||
|
|
|
|
|
| DAT CONTROL |
| ||
| CYCLE PERIOD | 200 S |
| |
| DAT1 |
|
|
|
| DAT2 |
|
|
|
|
|
|
| |
| DIAGNOSTICS |
|
| |
|
|
| ||
|
|
| ||
|
|
|
|
|
| ON/OFF CYCLE TIMER 1 |
| ||
| OUTPUT |
| RLY2 |
|
| INPUT |
| C1 |
|
| SETPOINT |
| 15000 µS |
|
| PB LIMIT |
| 250 µS |
|
|
|
|
| |
| DIAGNOSTICS |
|
| |
|
|
| ||
|
|
|
|
|
ATTENTION: Any value entered for one of these control- related parameters will take effect as soon as it is entered.
Specify the length of the cycle period (in seconds) for the
Use this screen to select the DAT control output to be configured.
The relay assigned to this DAT control output during I/O setup will already be filled in. (This is
Specify the process value or computed value to be used as the input.
Enter the setpoint at which the output should be turned on.
Enter the PB Limit. This is the value for which the output’s on duration will be maximum.
7/99 | 9782 Series Conductivity/Resistivity Analyzer/Controller - Operator’s Manual |
