To install and print using the Microsoft stack
1.Make sure that you have installed the HP Photosmart software on the computer.
NOTE: The purpose of installing the software is to make sure the printer driver is available for the Bluetooth® connection. Therefore, if you have already installed the software, you do not need to reinstall it. If you want both a USB and a Bluetooth® connection to the HP Photosmart, install the USB connection first. For more information, see the Setup Guide. However, if you do not want a USB connection, select Directly to the computer on the Connection Type screen. Also, on the Connect Your Device Now screen, select the check box next to If you are unable to connect your device now... at the bottom of the screen.
2.Attach an HP bt450 to the front USB port of the HP Photosmart.
3.If you are using an external Bluetooth® adapter for your computer, make sure your computer is started and then attach the Bluetooth® adapter to a USB port on the computer. If you have Windows XP with Service Pack 2 or Windows Vista installed, the Bluetooth® drivers are installed automatically. If you are prompted to select a Bluetooth® profile, select HCRP.
If your computer has Bluetooth® built in, just make sure the computer is started.
4.On the Windows taskbar, click Start, and then click Printers and Faxes (or click Control Panel, and then Printers).
5.
6.Click Next, and then select A Bluetooth Printer.
7.Follow the onscreen instructions to finish the installation.
8.Print as you would to any printer.
To install and print using the Widcomm stack
1.Make sure that you have installed the HP Photosmart software on the computer.
NOTE: The purpose of installing the software is to make sure the printer driver is available for the Bluetooth® connection. Therefore, if you have already installed the software, you do not need to reinstall it. If you want both a USB and a Bluetooth® connection to the HP Photosmart, install the USB connection first. For more information, see the Setup Guide. However, if you do not want a USB connection, select Directly to the computer on the Connection Type screen. Also, on the Connect Your Device Now screen, select the check box next to If you are unable to connect your device now... at the bottom of the screen.
2.Attach an HP bt450 to the front USB port of the HP Photosmart.
3.Click the My Bluetooth Places icon on the desktop or in the taskbar.
4.Click View devices in range.
5.Once the available printers are discovered,
6.Print as you would to any printer.
Finish setup
Use printer sharing
If your computer is on a network, and another computer on the network has an
HP Photosmart connected to it by a USB cable, you can print to that printer using printer sharing.
Computer connection information | 21 |
