HP D7200 manual Print quality troubleshooting

Models: D7200

1 169
Download 169 pages 51.38 Kb
Page 113
Image 113

Chapter 12

Troubleshooting

If the screen still appears, try uninstalling the HP Photosmart software, rebooting your computer, and temporarily disabling your firewall before reinstalling the

HP Photosmart software. You can re-enable your firewall application after installation is complete. If you still see firewall pop-up messages, you must always accept or allow the pop-up messages.

For more information, see the documentation provided with the firewall software.

Cause: A Virtual Private Network (VPN) is preventing the HP Photosmart from accessing your computer.

Solution: Try temporarily disabling the VPN before proceeding with the installation.

NOTE: The HP Photosmart is not accessible during VPN sessions. However, print jobs are saved in the print queue. When you exit the VPN session, print jobs in the print queue will be printed.

Print quality troubleshooting

If you are having problems with print quality, try the solutions in this section and observe the following guidelines:

Replace refilled or empty ink cartridges with genuine HP ink cartridges.

Check the device settings to make sure that the print mode and paper selection is correct for the paper and the task.

For more information, see Set the paper type for printing” on page 51 and “Choose papers for printing” on page 39.

Print and evaluate a self-test report.

For more information, see Print a self-test report” on page 83. If the self-test report shows a defect, try the following:

Clean the ink cartridges automatically. For more information, see “Clean the print head” on page 90.

If you are missing lines when you print, clean the electrical contacts. For more information, see Clean the ink cartridge contacts” on page 90.

If the self-test report does not show a problem, investigate other causes, such as the image file or software program.

For additional ink cartridge troubleshooting, visit the HP Web site at www.hp.com/ support.

This section contains the following topics:

Ink is bleeding or smearing

Ink is not filling the text or graphics completely

The text edges are jagged

The printout has a horizontal band of distortion near the bottom of the page

Colors run into each other on the printout

Printouts have horizontal streaks or lines

Printouts are faded or have dull colors

112 Troubleshooting

Page 113
Image 113
HP D7200 manual Print quality troubleshooting