HP XC System Software 3.2.1 manual iLO Settings for HP ProLiant DL785 G5 Nodes, Is configurable

Table 4-40 iLO Settings for HP ProLiant DL785 G5 Nodes

Menu Name	Submenu Name	Option Name	Set to This Value
User		Add	Create a common iLO user name and password for every
			node in the hardware configuration. The password must
			have a minimum of 8 characters by default, but this value
			is configurable.
			The user Administrator is predefined by default, but
			you must create your own user name and password. For
			security purposes, HP recommends that you delete the
			Administrator user.
			You must use this user name and password to access the
			console port.
Network	DNS/DHCP	DHCP Enable	On
Settings	CLI	Serial CLI	115200 (Press the F10 key to save the setting.)
		Speed
		(bits/seconds)

4.Select File→Exit to exit the Integrated Lights Out Setup Utility and resume the power-on self-test.

5.Watch the screen carefully, and press the F9 key when prompted to access the ROM-Based Setup Utility (RBSU).

Perform the following procedure for each HP ProLiant DL785 G5 node in the hardware configuration:

114 Preparing Individual Nodes