HP XC System Software 3.2.1 Rbsu Settings for HP ProLiant DL585 Nodes, Nodes except the head node

1.Make the RBSU settings accordingly for each node. The settings differ depending on the hardware model generation:

•Table 4-36provides the RBSU settings for the HP ProLiant DL585 nodes.

•Table 4-37provides the RBSU settings for the HP ProLiant DL585 G2 nodes.

Table 4-36 RBSU Settings for HP ProLiant DL585 Nodes

Menu Name	Option Name	Set to This Value
System Options	Embedded Serial Port	Disabled
	Virtual Serial Port	COM1; IRQ4; IO:3F8h-3FFh
	Embedded NIC Port 1 PXE	Enabled (all nodes except the head
	Support	node)
	Embedded NIC Port 1 PXE	Disabled (head node only)
	Support
	Power Regulator for ProLiant	Disabled
Standard Boot Order (IPL)		Set the following boot order on all
		nodes except the head node; the
		CD-ROM must be listed before the
		hard drive.
	IPL1	CD-ROM
	IPL2	Floppy Drive (A:)
	IPL3	PCI Embedded HP NC7782
		Gigabit Server Adapter Port
		1
	IPL4	Hard Drive (C:)
		On the head node, set the boot order
		so that the CD-ROM is listed before
		the hard disk.
BIOS Serial Console and EMS	BIOS Serial Console Port	COM1; IRQ4; IO:3F8h-3FFh
	BIOS Serial Console Baud Rate	115200
	EMS Console	Disabled
	BIOS Interface Mode	Command Line
Advanced Options	page Directory Cache (PDC)	Disabled

Table 4-37lists the RBSU setting for the DL585 G2 nodes.

Table 4-37 RBSU Settings for HP ProLiant DL585 G2 Nodes

Menu Name	Option Name	Set to This Value
System Options	Embedded Serial Port	Disabled
	Virtual Serial Port	COM1
	Embedded NICs/NIC 1 boot	On all nodes except the head node, set this value
	Options	to PXE boot
	Embedded NICs/NIC 2 boot	Disabled (head node only)
	Options
	Power Regulator for	OS Control Mode
	ProLiant

4.7 Preparing the Hardware for CP4000 (AMD Opteron) Systems 109