4.7.11 Preparing HP xw9300 and xw9400 Workstations

HP xw9300 and xw9400 workstations are typically used when the HP Scalable Visual Array (SVA) software is installed and configured to interoperate on an HP XC system. Configuring an xw9300 or xw9400 workstation as the HP XC head node is supported.

Figure 4-24shows a rear view of the xw9300 workstation and the appropriate port connections for an HP XC system.

Figure 4-24 xw9300 Workstation Rear View

1

The callout in the figure enumerates the following:

1.This port is used for the connection to the administration network.

Figure 4-25shows a rear view of the xw9400 workstation and the appropriate port connections for an HP XC system.

Figure 4-25 xw9400 Workstation Rear View

1 2

The callouts in the figure enumerate the following:

1.If a Gigabit Ethernet (GigE) interconnect is configured, this port is used for the interconnect connection. Otherwise, it is used for an external connection.

2.This port is used for the connection to the administration network.

116 Preparing Individual Nodes