Table 4-27 iLO Settings for HP ProLiant DL365 G5 Nodes

Menu Name

Submenu Name

Option Name

Set to This Value

User

 

Add

Create a common iLO user name and password for every

 

 

 

node in the hardware configuration. The password must

 

 

 

have a minimum of 8 characters by default, but this value

 

 

 

is configurable.

 

 

 

The user Administrator is predefined by default, but

 

 

 

you must create your own user name and password. For

 

 

 

security purposes, HP recommends that you delete the

 

 

 

Administrator user.

 

 

 

You must use this user name and password to access the

 

 

 

console port.

Network

DNS/DHCP

DHCP Enable

On

4.Select FileExit to exit the Integrated Lights Out Setup Utility and resume the power-on self-test.

5.Watch the screen carefully, and press the F9 key when prompted to access the ROM-Based Setup Utility (RBSU).

Perform the following procedure from the RBSU for each HP ProLiant DL365 G5 node in the hardware configuration:

98 Preparing Individual Nodes

Page 98
Image 98
HP XC System Software 3.2.1 manual iLO Settings for HP ProLiant DL365 G5 Nodes