3
Chapter 3. Installing and setting up call.connect
This chapter explains how to install and set up call.connect and vendor.connect. Prior to reading this chapter, you must be familiar with the skills listed for each product and have knowledge about System21 and its configuration.
Installing call.connect involves a number of steps on both the server and on each client. Before starting, be sure to verify that all prerequisites are in place. Use care in following the steps that are provided. Failure to do so can result in problems with the installation of these products. Once these products are configured, they require little or no maintenance.
Throughout the installation instructions, you will see variables in italics. For each of these variables, you need to provide a real name. For example, for the variable <iSeries>, you must change it to the name of the machine you are using.
© Copyright IBM Corp. 2002. All rights reserved. | 19 |
