Lexmark X642e manual Moving the MFP within the office, Preparing the MFP for shipment

Moving the MFP

Follow these guidelines to move the MFP within the office or to prepare the MFP for shipment.

CAUTION: Follow these guidelines to avoid injuring yourself or damaging the MFP.

•Always use at least three people to lift the MFP.

•Always turn off the MFP using the power switch.

•Disconnect all cords and cables from the MFP before attempting to move the MFP.

•Failure to repackage the MFP properly for shipment can result in damage to the MFP not covered by the MFP warranty.

•Damage to the MFP caused by improper moving is not covered by the MFP warranty.

Moving the MFP within the office

The MFP can be safely moved from one location within an office to another following these precautions:

•The MFP must remain in an upright position.

•Any cart used to move the MFP should have a surface able to support the full footprint of the MFP.

•Severe jarring movements may cause damage to the MFP and must be avoided.

Preparing the MFP for shipment

To transport the MFP by vehicle or by commercial carrier, the MFP must be repackaged for shipment using the proper packaging. The MFP package must be securely fastened to its pallet. Do not use a shipping or transport method that requires the MFP to be shipped without a pallet. The MFP must stay upright throughout the shipment. If you do not have all the original packaging, contact your local service representative to order the repackaging kit. Additional instructions for repackaging the MFP are provided in the repackaging kit.

134