Lexmark X642e manual Ordering charge rolls, Ordering a transfer roller, Ordering pick rollers

Ordering charge rolls

We recommend ordering new charge rolls when toner fog or background shading appears on printed pages. Order Lexmark part number 40X0127.To order a charge roll, contact the place where you bought the MFP for more information.

Ordering a transfer roller

Order Lexmark part number 40X0130.To order a transfer roller, contact the place where you bought the MFP for more information.

Ordering pick rollers

Order Lexmark part number 40X0070. To order pick rollers, contact the place where you bought the MFP for more information.

Order new pick rolls when the paper fails to properly feed from the tray.

When ordering pick rollers, you need one set per input tray excluding the multipurpose feeder.

Ordering an ADF pick mechanism

Order Lexmark part number 40X0453.To order a pick mechanism, contact the place where you bought the MFP for more information.

Order a new pick mechanism when paper fails to proper feed from the automatic document feeder or if you have scanned 120,000 pages.

Ordering an ADF separator roller

Order Lexmark part number 40X0454. To order a pick separator roller, contact the place where you bought the MFP for more information.

Order a new separator roller when the paper if you experience problems with paper double-feeding through the automatic document feeder or if you have scanned 120,000 pages.

Ordering a label fuser cleaner

A special label fuser cleaner should be used for label applications to optimize feeding reliability. To order this item, visit our Web site at www.lexmark.com, or contact your Lexmark representative.

Label fuser cleaners are not recommended for duplex printing.

130