Lexmark X642e manual Changing the fax resolution, Adjusting the Darkness setting

touch Done. This setting can be especially useful in sending information to fax lines that are not readily available during certain hours, or when transmission are cheaper.

Note: If the device is powered off when the delayed fax is due to be sent, the fax is sent the next time the MFP is powered up.

Transmission Log: Prints the transmission log or transmission error log.

Scan Preview: Displays the image before it is included in the fax. When a page is scanned, the scanning is paused and a preview image appears.

Note: Scan Preview is not supported on all models.

Edge Erase: Eliminates smudges or information around the edges of your document. You can choose to eliminate an equal area around all four sides of the paper or pick a particular edge. Edge Erase will erase whatever is within the area selected, leaving nothing printed on that portion of the paper.

Changing the fax resolution

1Place the original document in the automatic document feeder facing up, short-edge first.

2Adjust the paper guides.

3Touch Fax.

4Enter the fax number.

5Touch Options.

6Touch the button that represents the resolution you want.

7Touch Fax It.

Adjusting the Darkness setting

1Place the original document in the automatic document feeder facing up, short-edge first.

2Adjust the paper guides.

3Touch Fax.

4Enter the fax number.

5Touch Options.

6Touch the left Darkness arrow to reduce the darkness of the fax, or touch the right Darkness arrow to increase the darkness of the fax.

7Touch Fax It.

55