Lexmark X642e Loading paper, transparencies, or envelopes, Loading letterhead or preprinted paper

4Flex the sheets or envelopes back and forth to loosen them, then fan them. Do not fold or crease the print media. Straighten the edges on a level surface.

Note: Hold transparencies by the edges, and avoid touching the print side. Fan the stack of transparencies to prevent jams. Be careful not to scratch or leave fingerprints on the transparencies.

Paper

Envelopes

Transparencies

5Load the media in the tray.

Use the stack height label as a guide for stack height when loading print media.

Loading paper, transparencies, or envelopes

Note: Letterhead or other preprinted paper must be loaded differently depending on the options you have installed.

•Load paper or transparencies with the left edge of the stack against the stack height label and with the recommended print side facing up.

•Load envelopes flap side down with the stamp area and flap on the left. The end of the envelope with the stamp area enters the multipurpose feeder first.

–Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self- stick adhesives. These envelopes may severely damage the MFP.

Note: Load only one size and type of print media at a time in the multipurpose feeder. Do not mix sizes and types in the same tray.

Loading letterhead or preprinted paper

•Follow the illustrations for loading the paper according to your options.

85