Lincoln Electric SVM158-A service manual Adjust the remote output control potentiometer connect

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

F-95		TROUBLESHOOTING AND REPAIR		F-95
		RETEST AFTER REPAIR
	Test	Required Action	Expected Results
	Steps
			Lft.display	Rt. display
	33	Adjust the remote output control potentiometer connect-	6-PIn roCP	HI
		ed to the 6-pin amphenol connector to its highest set-
		ting.
	34	Adjust the remote output control potentiometer connect-	6-PIn roCP	Lo
		ed to the 6-pin amphenol connector to its lowest set-
		ting.
	35	This will only appear if a trigger switch is already con-	6-PIn rIgr	oFF
		nected to the 6-pin amphenol connector on the front of
		the machine and the trigger switch is presently on.
		Turn the trigger switch connected to the 6-pin amphenol
		connector off.
	36	Turn the trigger switch connected to the 6-pin amphenol	6-PIn Rigr	on
		connector on.
	37	Turn the trigger switch connected to the 6-pin amphenol	6-PIn rLgr	oFF
		connector off.
	38	This will only appear if a potentiometer is still connect-	dcon	6-PIn roCP
		ed to the 6-pin amphenol connector. If this message
		appears, disconnect the potentiometer from the 6-pin
		amphenol connector.
	39	This will only appear if a potentiometer is already con-	dcon	14-PIn roCP
		nected to the 14-pin amphenol connector. If this mes-
		sage appears, disconnect the potentiometer from the
		14-pin amphenol connector.
	40	Connect a remote output control potentiometer to the	con	14-PIn roCP
		14-pin amphenol connector.
	41	Adjust the remote output control potentiometer connect-	14-PIn roCP	HI
		ed to the 14-pin amphenol connector to its highest set-
		ting.
	42	Adjust the remote output control potentiometer connect-	14-PIn roCP	Lo
		ed to the 14-pin amphenol connector to its lowest set-
		ting.
	43	This will only appear if a trigger switch is already con-	14-PIn rIgr	oFF
		nected to the 14-pin amphenol connector and the trig-
		ger switch is presently on. Turn the trigger switch con-
		nected to the 14-pin amphenol connector off.
	44	Turn the trigger switch connected to the 14-pin amphe-	14-PIn rIgr	on
		nol connector on.
45	Turn the trigger switch connected to the 14-pin amphe-	14-PIn rIgr	oFF
		nol connector off.
		V350-PRO