Lincoln Electric SVM158-A service manual Auxiliary Power

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

B-10 B-10

OPERATION

AUXILIARY POWER

•115VAC, 42VAC and 24VAC power is available from the 14-pin MS-style connector. The Construction model of the Invertec V350-Pro does not have the 14-pin MS-style connector) These supplies are intended to supply power for auxiliary equipment like wire feeders and the TIG Module.

•115VAC supply is rated at 2 amps and is protected by a 3.5 amp breaker.

•42 VAC supply is rated at 5.5 amps and is protected by a 6 amp breaker.

•24 VAC supply is rated at 5.5 amps and is protected by a 6 amp breaker.

LIMITATIONS

•The V350-Pro is not recommended for processes other than those listed.

•The V350-Pro can only be used with the recom- mended equipment and options.

RECOMMENDED PROCESSES

Properly equipped, the Invertec V350-Pro supports GMAW-P, FCAW, SMAW, GTAW and CAC-A processes for a variety of materials, including mild steel, stainless steel, cored wires, and aluminum.

V350-PRO