Memory maps
http://www.motorola.com/computer/literature 1-7
1
The following table shows the programmed values for the associated
Hawk PCI Host Bridge Registers for the suggested Processor Memory
Map.
PCI Memory Map
Following a reset, the Hawk ASIC disable’s all PCI slave map decoders.
The MVME5100 is fully capable of supporting both PREP and CHRP PCI
Memory Maps with RAM size limited to 2 GB. The default values for the
PCI Slave Image registers, are listed in Ch apter 3, PPCBug, of the
MVME5100 Single Board Computer Installation and Use manual.
VME Memory Map
The MVME5100 is fully capable of supporting both the PREP and the
CHRP VME Memory Maps with RAM size limited to 2GB. The default
values for the VME Slave Image registers are listed in Chapter 3, PPCBug,
of the MVME5100 Single Board Computer Installation and Use manual.
Table 1-4. Hawk PPC Register Values for Suggested Memory
Map
Address Register Name Register Name
FEFF 0040 MSADD0 X000 F3FF [X:1..8]
FEFF 0044 MSOFF0 & MSATT0 0000 00C2
FEFF 0048 MSADD1 FE00 FE7F
FEFF 004C MSOFF1 & MSATT1 0200 0 0C0
FEFF 0050 MSADD2 0000 0000
FEFF 0054 MSOFF2 & MSATT2 0000 0000
FEFF 0058 MSADD3 0000 0000
FEFF 005C MSOFF3 & MSATT3 0000 0 000