- 103 -
1Connect the AC adaptor (supplied with USB HDD) to the USB HDD.
If you are using a bus-powered or portable USB HDD, this unit can supply power to the USB HDD
by USB Connection Cable (supplied with USB HDD).
2Connect the AC adaptor to this unit.
Use the AC adaptor to free you from worrying about the battery running down.
3Turn on this unit, and press the THUMBNAIL button to switch to Playback
Mode.
4Set [USB MODE] to [HOST]. (l161)
5Connect this unit to the USB HDD with the USB Connection Cable (supplied
with USB hard disk).
It may take several minutes until the connection is compl eted.
6Touch the desired item.
You can perform the following operations by connecting the USB HDD containing scenes and still
pictures copied from this unit to another device.
jSaving the scenes and still pictures on a PC or copying them back from the PC to the USB
HDD. Use HD Writer XE 2.0 to perform these operations.
: [OTHER FUNCTION] # [USB MODE] # [HOST]
[Simple copy]: Copies all scenes and still pictures recorded with this unit that
have not been copied yet. (l105)
[Copy selected files]: Allows you to select desired scenes/still pictures, and then
copy. (l105)
[Playback from External
Drive]:
Plays back scenes and still pictures stored in a USB HDD on
this unit. (l106)
[Safe Removal]: Allows you to safely remove this unit and a USB HDD.
When the USB HDD is connected to other devices such as Blu-ray disc recorder, a
message prompting to format the USB HDD may display. All the scenes and still pictures
recorded on the USB HDD will be erased if formatted. Do not format as important data will
get erased and it will be impossible to restore.
MENU