- 133 -
≥This function’s default setting is [SCENE1].
≥It is possible to switch the scene file by touching to while displaying the operation icons.
(l75)
≥It will return to the default settings when [SCENE] is selected in [INITIAL SET]. (l160)
Adjusts the level of the image outline correction.
≥Switch to Manual Mode. (l34)
1Touch [DETAILLEV EL].
2Touch / to adjust settings.
3Touch [EXIT] to exit the menu screen.
Adjusts the degree of vertical outline correction in images.
≥Switch to Manual Mode. (l34)
1Touch [VDETAIL LEVEL].
2Touch / to adjust settings.
3Touch [EXIT] to exit the menu screen.
Adjusts the level to eliminate the noise of the detail.
≥Switch to Manual Mode. (l34)
1Touch [DETAILCORING].
2Touch / to adjust settings.
≥Setting to s direction gives crisp images but allows a slight increase in no ise. Setting in the r
direction reduces noise.
3Touch [EXIT] to exit the menu screen.
Adjusts color density.
≥Switch to Manual Mode. (l34)
1Touch [CHROMA LEVEL].
2Touch / to adjust settings.
3Touch [EXIT] to exit the menu screen.
Adjusts color balance.
≥Switch to Manual Mode. (l34)
1Touch [CHROMA PHASE].
2Touch / to adjust settings.
3Touch [EXIT] to exit the menu screen.
[DETAIL LEVEL][V DETAIL LEVEL][DETAIL CORING][CHROMA LEVEL][CHROMA PHASE]
SCN1
SCN6