[2 SLOTS FUNC.]

You can set the auto switch recording, simultaneous recording and background recording.

Insert SD cards to card slot 1 and card slot 2.

[OFF]:

Cancel the setting.

[AUTO SW]*1:

Set the auto switch recording

[SIMULTANEOUS]:

Set the auto simultaneous recording

[BACKGROUND]*1, 2:

Set the background recording

*1 This effect cannot be set for Interval Recording.

*2 This function is not available in the following cases:

jWhen [REC FORMAT] is set to a setting with a size of C4K (4096k2160) or 4K (3840k2160) jWhen the bit rate of [REC FORMAT] is above 50 Mbps

Auto switch recording

This is simple Relay Recording. It is possible to continuously record on the SD card in the other card slot even when the available capacity of the SD card runs out during the recording. Note that there will be a momentary pause in the sound when recording media is switched.

is displayed beside the display of the SD card selected as the recording destination of motion pictures in [MEDIA SELECT] (l 30). When the recording media is switched and auto switch

recording starts, will disappear from the location and instead be displayed beside the other SD card display.

Even after switching of the recording media, you can replace the SD card that ran out of space with a new one and record the motion picture onto three or more SD cards. Since it may take a while for this unit to recognize a new SD card, replace the SD card that ran out of space when the SD card currently being used as a destination still has sufficient remaining recordable time.

Simultaneous recording

Same motion picture can be recorded on two SD cards.

is displayed beside the display of the SD card selected as the recording destination of motion pictures in [MEDIA SELECT] (l 30).

If you set the recording destination of motion pictures to [SD CARD 1] in [MEDIA SELECT], they will also be recorded to [SD CARD 2] simultaneously.

We recommend that you perform simultaneous recording using SD cards of the same Speed Class rating and capacity.

Simultaneous recording is not possible when different types of SD cards (SDHC Memory Card/ SDXC Memory Card) are used.

Background recording

You can continue recording a motion picture by recording it on the SD card that is not set as a recording destination in [MEDIA SELECT] (l 30).

When the recording destination of motion pictures is set to [SD CARD 1] in [MEDIA SELECT] (l 30), [SD CARD 2] will be used for background recording. The following instructions assume that the recording destination of motion pictures is set to [SD CARD 1].

is displayed beside the SD card display for card 2.

- 143 -

Page 143
Image 143
Panasonic HC-X1000 owner manual Slots Func, Auto switch recording, Simultaneous recording, Background recording, 143