If you take your finger off the zoom lever during zoom operation, the operation sound may be recorded. When returning the zoom lever to the original position, move it quietly.

The sound of the zoom mechanism becomes louder than usual during fast zoom operation. This may cause the sound to be recorded during recording.

It can be focused approximately 1.5 m (4.9 feet) or further when the zoom magnification is at its maximum.

It can be focused approximately 3.0 cm (1.2 q) or further when the zoom magnification is set to 1k.

Utilizing the USER button

Digital zoom can be used by setting the USER button. (l 65)

Please refer to page 61 for details about setting the USER button.

Recording

Image Stabilizer Function

Use the Image Stabilizer to reduce the effects of shake during recording. This unit is equipped with Hybrid Optical Image Stabilizer.

Hybrid Optical Image Stabilizer is a hybrid of Optical and Electrical Image Stabilizer.

O.I.S.

Optical Image Stabilizer button

Press the button to turn Optical Image

Stabilizer on/off.

/ # (setting canceled)

≥ When [HYBRID O.I.S.] is [ON], is

displayed. When [OFF], is displayed.

Changing Image Stabilizer Mode

MENU : [RECORD SETUP] # [HYBRID O.I.S.] # [ON] or [OFF]

When set to [ON], you can further improve image stabilization for holding the unit and recording a distant subject with zoom.

This cannot be set when Optical Image Stabilizer is set to (setting canceled).

When the size is set to C4K (4096k2160) or 4K (3840k2160) in [REC FORMAT], [HYBRID O.I.S.] is set to [OFF]. (l 139)

Stabilization may not be possible under strong shaking conditions.

When using a tripod, we recommend that you set the Image Stabilizer to (setting canceled).

- 38 -

Page 38
Image 38
Panasonic HC-X1000 owner manual Image Stabilizer Function, Optical Image Stabilizer button, Changing Image Stabilizer Mode