- 127 -
≥Transmission speed may decrease, or may not be usable depend ing on the environment it is
used in.
If the Wi-Fi connection cannot be established
≥Please refer to the operating instruction of the devic e in use for details about the setting of the
wireless access point or smartphone.
Confirming that the Wi-Fi connection is complete
j is displayed on the screen
Problem Check points
It cannot connect to the
wireless access point.
The wireless access point
is not detected.
(General)
≥Turn ON the wireless access point.
≥Approach the wireless access point and reconnect.
≥If it takes time to complete the connection, the Wi-Fi
connection will be aborted.
Reset the connection settings.
≥Check how to connect to the wireless access point and h ow
to set the security settings.
≥If the wireless access point supports both the 2.4 GHz band
and the 5GHz band, check if the setting for the 2.4GHz band
is enabled.
≥Make sure the wireless access point is registered in this un it.
(l129)
≥The device may be unable to locate the wireless access point
due to problems with the signal. Refer to “Setting up a
connection manually”. (l124)
([WPS Connection])
≥Make sure the wireless access point is in the correct WPS
standby mode.
≥Make sure the PIN code has been correctly input.
([Search for wireless network] or [Manua l Setting])
≥Make sure the SSID and password have been correctly input.
≥Check the Authentication method, Encryption type, and
Encryption key (Password).
Radio waves of the
wireless access point get
disconnected.
≥The condition may improved by moving the location or
changing the angle of the wireless access point.
≥If you use another 2.4 GHz band device such as a microwave
oven or cordless telephone nearby, you may interrupt the
signal. Keep a sufficient distance from these types of devices.