- 50 -
To return to Auto Gain Mode, press the GAIN button or set this unit to Intelligent Auto Mode using
the iA/MANU switch.
If you register [SUPER GAIN] to a USER button, you can set t he gain value to 27 dB or 30 dB.
(l50)
If the gain value is increased, the noise on the screen increas es.
In Auto Iris Mode or Auto Shutter Mode, the screen brightness may not change even if you adjust
the gain. (l48, 51)
Changing the maximum possible gain value for Auto Gain Mode
Switch to Manual Mode. (l34)
The value is set to [24dB] In Intelligent Auto Mode.
You can use Super Gain by registering [SUPER GAIN] to a USER button.
Super Gain allows you to set the gain value to 27 dB or 30 dB.
Please refer to page 61 for details about setting the U SER button.
Switch to Manual Mode. (l34)

Press the USER button to which [SUPER GAIN] is registered or touch the

applicable USER button ico n.

To cancel Super gain, press the USER button or touch the USER button icon again.

To change the gain value of Super Gain

Super Gain is not available in the following cases:
jIn Intelligent Auto Mode
jWhen [INFRARED REC] is set to [ON] (l146)
: [CAMERA SETUP] # [AGC LIMIT] # desired setting
[3dB]/[6dB]/[9dB]/[12dB]/[15dB]/[18dB] /[21dB]/[24dB]
Super Gain
: [CAMERA SETUP] # [SUPER GAIN] # desired setting
[27dB]/[30dB]
MENU
MENU