About the AC adaptor/battery charger
≥If the temperature of the battery is extremely high or extremely low, charging may take time or the battery may not be charged.
≥If the charging lamp keeps flashing, make sure that the terminals of the battery or the battery charger are not exposed to dirt, foreign objects or dust, then reconnect them properly.
Disconnect the AC cable from the AC outlet when you remove dirt, foreign objects or dust on the terminals of the battery or the battery charger.
If the charging lamp is still flashing, the temperature of the battery may be extremely high or extremely low or something may be wrong with the battery or battery charger. Contact your dealer.
≥If you use the AC adaptor or battery charger near a radio, radio reception may be disturbed. Keep the AC adaptor or battery charger 1 m (3.3 feet) or more away from the radio.
≥When using the AC adaptor or battery charger, it may generate whirring sounds. However, this is normal.
≥After use, be sure to disconnect the AC cable from the AC outlet. (If you leave this unit connected, the AC adaptor will consume approximately 0.3 W and the battery charger approximately 0.3 W of current.)
≥Always keep the electrodes of the AC adaptor, battery charger and battery clean.
≥Install the device near an AC outlet so that the power disconnection device (AC mains plug) can be accessed easily by hand.
About the SD card
When disposing of or giving away the SD card, note that:
≥Formatting and deletion of this unit or computer only changes the file management information and does not completely delete the data in the SD card.
≥It is recommended that the main SD card is either physically destroyed or the SD card is physically formatted using this unit when disposing of or giving away the SD card.
≥To physically format, connect this unit to the AC adaptor, select [OTHER FUNCTION] # [FORMAT MEDIA] # [SD CARD 1] or [SD CARD 2] from the menu, and touch [YES]. Press and hold recording start/stop button in the following screen for three seconds. Screen to delete the SD card data is displayed, so select [YES] and follow the instruction on the screen.
≥The customer is responsible for the management of the data in the SD card.
