Panasonic HC-X1000 6

- 94 -

6Touch [PC] on the screen of this unit.

≥This unit is automatically recognized as an external drive of the PC. (l96)

≥When you select an option other than [PC], reconn ect the USB cable.

≥When using the battery, the LCD monitor turns off after about 5seconds. Touch the screen to turn

the LCD monitor on.

≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any

other USB cables.)

≥When performing reading/writing between a PC and an S D card, be aware that some SD card

slots built into PCs and some SD card readers are not compatible with the SDHC Memory Card or

SDXC Memory Card.

≥When using an SDXC Memory Card, check the following support site.

http://panasonic.net/avc/sdcard/information /SDXC.html

Using this unit as a card reader

When this device and a computer for editing are connected using a USB Connection Cable, image

data in the SD card can be copied.

≥Concerning non-linear editing, refer to the instruction manual of your editing software.

To use this unit as a card reader, you need a PC that meets the following system requirem ents.

≥Even if the system requirements mentioned in this owner’s manual are fulfilled, some PCs cannot

be used.

≥The USB equipment operates with the driver ins talled as standard in the OS.

∫If using Windows

≥Operation is not guaranteed in the following cases.

jOperation on an upgraded OS.

jOperation on an OS other than the one pre-installed.

About the screen indication of the un it

≥Do not disconnect the USB cable, battery, or AC adaptor while the access lamp is on or card

access icon ( ) appears on the unit screen.

≥If the screen does not change when the unit is operated while connected to a PC, disconnect

the battery and/or AC adaptor, wait approximately 1 minute, rec onnect the battery and/or AC

adaptor, wait approximately 1 minute again, and then turn the unit ba ck on. (Data may be

destroyed when above operation is performed while accessing the SD card.)

Operating environment (mass storage)

OS Windows 8/Windows 8.1 (32 bit/64 bit)

Windows 7 (32 bit/64 bit) SP1

CPU 1 GHz or higher

32-bit (k86) or 64-bit (k64) processor (including compatib le CPU)

RAM 2 GB or more (64 bit)/1 GB or more (32 bit )

Interface USB port

Other requirements Mouse or equivalent pointing device

Contents

Main Owners Manual 4K Video Camera Read this first About the recording method for recording motion pictures *1 AVCHDProgressive (1080/60p, 1080/ 50p) supported. Regarding system frequencies Indemnity about recorded content About security Caution regarding laser beams Cards that you can use with this unit For the purposes of this owners manual Contents Preparation Recording Playback With a PC Copy/Dubbing Wi-Fi Menu Display Names and Functions of Main Parts Page Page 77 78 79 80 71 72 73 7674 75 81 Attaching/detaching the lens hood Opening/closing the lens cover Adjust the length of the grip belt so that it fits your hand. Attaching the eye cup Attaching the Shoulder strap Attaching the front microphone Attaching the INPUT terminal cap Attaching the tripod About batteries that you can use with this unit Charging the battery Power supply Charging lamp [CHARGE] A Power lamp B 1 2 Inserting/removing the battery Install the battery by inserting it in the direction shown in the figure. Removing the battery Charging and recording time Charging/Recording time Page Checking the remaining power using this unit Checking the remaining power using the battery How to read the remaining power indicator :Lit up/ :Off Checking the remaining power of the battery Battery capacity indication Connecting to the AC outlet 1 2 Cards that you can use with this unit About the Speed Class ratings for recording motion pictures Preparation of SD cards Inserting/removing an SD card 1 insert (remove) the SD card into (from) the card slot B. 2 cover. Turning the unit on/off Selecting a mode To turn off the unit Using the LCD monitor 1 Using the LCD monitor/Viewfinder How to use the touch screen Touch Slide while touching About the operation icons LCD monitor adjustment Viewfinder adjustment [LCD SET] Adjusting the field of view [EVF SET] Recording yourself [EVF COLOR] 1 2 Setting date and time Time zone Using the menu screen Before recording Formatting media 2 or still pictures. Selecting a media to record 1 Recording Mode. (l22) R 1h20mR 1h20mR 1h20m 2 Recording motion pictures TC 00:00:00.00TC 00:00:00.00TC 00:00:00.00 1 2 About the screen indications while recording still pictures Recording still pictures About picture size Intelligent Auto Mode Intelligent Auto Mode/Manual Mode iA/MANU switch Automatic White Balance Auto Focus List of available/unavailable camera operations in Intelligent Auto Mode/Manual Mode Intelligent Auto Plus 2 3 4 Ring zoom About the zoom speed Using the zoom Zoom ring A Zoom lever/Sub zoom lever Utilizing the USER button Changing Image Stabilizer Mode Image Stabilizer Function Optical Image Stabilizer button 1 2 Focus To emphasize the outline of images Adjusting the level of [EVF/LCD DETAIL] 3Touch [ENTER]. Setting the peaking frequency of [EVF/LCD DETAIL] 1 2 Focus Assist To adjust the magnified display Touch / or rotate the multi-function dial to change the magnification level. Selecting a Focus Assist method Using Focus Assist To change the peaking settings 3Touch [ENTER]. Focus Transition 2 3 Registering a focus position 1 2 the applicable USER button icon. 3 4 Using Focus Transition Page 1 2 About White Balance modes Balance mode. White Balance To set ATW Lock To finely adjust the White Balance To set the White Balance in accordance to the recording scene Iris adjustment 1 Iris/Gain adjustment Adjusting brightness during the Auto Iris Mode 3Touch [EXIT] to complete the setting. Utilizing the USER button Gain adjustment 1 2 Changing the maximum possible gain value for Auto Gain Mode To change the gain value of Super Gain Super Gain 1 2 dial. Manual shutter speed 1 2 1/60.0), press the multi-function dial. 3 4 Shutter speed range for the Synchro Scan setting Audio Input Using an external microphone or audio equipment 1 equipment to AUDIO INPUT1 , 2 terminals (XLR 3 pin). (l12) 4 3 2 2 Selecting an adjustment method [AUTO] [MANUAL] To set the ALC function to both audio channels 1 and 2 Using the ALC function [ON] [OFF] Press the COUNTER button to switch the counter display. Counter display Setting the Time Code [TC MODE] [TCG] 2 Setting the User Information 2 [TC PRESET] [UB PRESET] Setting the Recording Counter To reset the Recording Counter for the Recording Mode [REC COUNTER] Setting the USER button 3 USER button Using the USER button Switch display/not-display of the USER buttons Check the setting of the USER buttons Functions of the USER button List of USER button function Focus Assist Backlight Compensation Spotlight Black Fade White Fade To change the zoom magnification of Digital Zoom EVF/LCD detail ATW Lock Digital Zoom To move a histogram 1Press USER button or touch USER button icon in the recording screen. 2Touch [YES]. Histogram Recording Check Last Scene Delete DRS Freeze Frame Freeze Super Gain Setting an Area Mode effect Using Area Mode Area Mode Page To correct the tilt Level Gauge Press the applicable USER button or the USER button icon. Background Flash band compensation Menu Color Bar Screen Useful functions BARS button ND filter Slide the ND filter switch. Zebra Switching the screen indications/mode information display To display the Mode Information ZEBRA button DISP/MODE CHK button Using Operation Icons 1 2 Using of multi-function dial Selecting/setting items Using the multi manual function Headphone Volume Adjustment 1 2 3 4 Mode) Touch the desired recording mode D and recording format E for playback. Motion picture/Still picture playback (To set this unit to Still Picture Playback Mode) Touch the still picture F. 5 back. 6 operation icon. Change the thumbnail display Speaker/Headphone volume adjustment Adjusting the volume with the volume lever/sub zoom lever Adjusting the volume with the multi-function dial 1Push the multi-function dial while [ VOLUME] is displayed. Motion picture compatibility Still picture compatibility Motion picture playback using operation icon Page Creating still picture from motion picture Repeat Playback Useful functions Resuming the previous playback Playing back scenes or still pictures by date 1 2 3 To delete the scene or still picture being played back Touch while scenes or still pictures to be deleted are being played back. To delete scenes or still pictures from the thumbnail display Deleting scenes/still pictures 2 3 Protecting scenes/still pictures 2 Watching Video/Pictures on your TV 1 2 3 To watch images on a regular TV (4:3) or when both sides of the images do not appear on the screen 1Select the [HDMI RESOLUTION] menu. 2Select the [DOWN CONV.] menu. To display the on-screen information on the TV Connecting with a HDMI cable What you can do with a PC Connecting to a PC 1 2 3 4 5 Using this unit with a PC 6 Using this unit as a card reader If using Windows Operating environment (mass storage) If using Mac 1 2 If using Mac 1 2 Copy to PC Folder names for motion picture data recorded in MOV/MP4 format About the PC display CAM_SD 100RARHM Using HD Writer XE 2.0 Features of HD WriterXE 2.0 Important Notice End User License Agreement Before Installing HD WriterXE 2.0 Operating environment for HDWriter XE 2.0 To use the HDWriter XE 2.0 1 2 Preparing for copying/playing back Copying/playing back with a USB HDD 1 2 3 4 5 6 Points to check before copying Formatting Displaying media information Page Playing back the External Drive 1 2 3 To terminate the connection between this unit and the USB HDD Check before dubbing Dubbing with a Blu-ray disc recorder, video device, etc. To dub using equipment with an SD card slot To dub using equipment with a USB terminal 1 2 compatible DVD recorder. Dubbing in high-definition picture quality 3 4 5 (AVCHD) compatible DVD recorder. 1 2 Wi-Fi function This unit is WPS-compatible Remote operation range Preparations before using remote operation 3Register [Wi-Fi] to a USER button. (l61) Remote operation Image App Image App Page Using remote operation with a direct connection 1 2 1 2 3 If the device is Android (non-NFC-compatible) or iOS 1 2 3 If you touch the second smartphone when this unit has already been connected to the first one 1 2 3 4 5 6 If the device is Android (non-NFC-compatible) or iOS About remote operation In Recording Mode Screen display during remote operations = Functions available for remote operations Install the Image App About the connection status icon when connected to Wi-Fi Using the Network Easy Setup to set up a connection 1 function. Setting Up a Wi-Fi Connection AThe connection status icon 5 1 3 When [QR code] is selected When [Wi-Fi] is selected 1 3 4 5 Connecting with WPS 1 3 4 5 6 Searching for wireless access points to set up a connection 1 function. 6 3 access point. 7 8 Setting up a direct connection to a smartphone 1 3 4 5 Page If the Wi-Fi connection cannot be established Page How to Use the [Wi-Fi Setup] Menu [Wi-Fi Easy Setup] [Wireless Settings] [Direct Connection] [Wi-Fi disconnect] [Start up using NFC] [Menu Password] Page Camera Setup 1Touch [CUSTOMIZE SCENE]. 2Touch the scene file. Default setting of the scene file 3 Change the setting of the camera setting menu. Using the Menu [CUSTOMIZE SCENE] [DETAIL LEVEL] [V DETAIL LEVEL] [DETAIL CORING] [CHROMA LEVEL] [CHROMA PHASE] Page 1Touch [GAMMA]. 2Touch the desired setting item. 3Touch [EXIT] to exit the menu screen. 1Touch [KNEE]. 2Touch the desired setting item. 3Touch [EXIT] to exit the menu screen. [GAMMA] [KNEE] [MATRIX] [SKIN TONE DTL] [FOCUS TRANSITION] Page Page Recording Setup How to read a [REC FORMAT] setting [MEDIA SELECT] [REC MODE] [REC FORMAT] 4K /60p 150M Page Page About the [REC FORMAT] setting when [SYSTEMFREQ] has been changed Auto switch recording Simultaneous recording Background recording [2 SLOTS FUNC.] How to use background recording [TIME LAPSE REC] 1Press the recording start/stop button to start recording. 2Press the recording start/stop button again to stop recording. Page [PRE-REC] [INFRARED REC] PRE-REC [TIME STAMP] [i.Zoom] [HYBRID O.I.S.] Page Page TC/UB SETUP Switch setting Page Display setting [USER BUTTON DISPLAY] [ZEBRA DETECT 1] [ZEBRA DETECT 2] [MARKER] Page Page Page AV output setting Other Functions [HDMI TC OUTPUT] [FORMAT MEDIA] [MEDIA STATUS] [REC LAMP] Page [ALERT SOUND] [ECONOMY (BATT)] [ECONOMY (AC)] [INITIAL SET] Wi-Fi setting Page Video Setup Picture Setup Recording indications Indications Freeze TC 00:00:0000 R 1h20m R 1h20m SE Playback indications Indication of connection to Wi-Fi About recovery Messages It is not a malfunction in following cases Troubleshooting Power Indication Recording Playback With other products With a PC About the Wi-Fi function If AVCHD scenes do not change smoothly when played back on another device Others About the Wi-Fi function Cautions for use About this unit About the battery About the AC adaptor/battery charger About the SD card LCD monitor/viewfind er About personal information About copyright Carefully observe copyright laws Licenses Recording modes/approximate recordable time Page Approximate number of recordable pictures