Area Function is not possible in following cases: jIn Intelligent Auto Mode

jWhen a remote control (commercially-available) is connected (l 6)

When using Area Mode, even if you turn on Marker by pressing the ZEBRA button, the luminance display frame will not be displayed. (l 74)

In addition, the luminance level will not be displayed if [AREA MODE] is set to [FOCUS], [IRIS] or [FOCUS/IRIS].

Focus Transition

Register “Focus Transition” to a USER button. (l 61)

Switch to Manual Mode. (l 34)

With Focus Transition, you can move the current focus position to a pre-registered focus position. (l 43)

Capture

Register “Capture” to a USER button. (l 61)

You can record still pictures or create still pictures from recorded motion pictures. (l 32, 85)

Wi-Fi

Register “Wi-Fi” to a USER button. (l 61) You can use the Wi-Fi function. (l 111)

Infrared light

Register “Infrared light” to a USER button. (l 61)

Switch to Manual Mode. (l 34)

You can turn on/off the infrared light when [INFRARED REC] (l 146) is set to [ON].

- 69 -

Page 69
Image 69
Panasonic HC-X1000 owner manual Focus Transition, Capture, Wi-Fi, Infrared light