- 44 -
4Touch [EXIT] to complete the setting.
≥The focus positions of the items you have set will be registered.
≥The focus position settings are canceled in the following cases:
jIf you turn the unit off
jIf you press the THUMBNAIL button
jIf you operate the zoom
≥Select the [FOCUS TRANSITION] menu. (l43)
≥Register [FOCUS TRANS] to a USER button. (l61)
1Switch to Manual Focus Mode. (l34)
2Press the USER button to which [FOCUS TRANSITION] is registered or touch
the applicable USER button icon.
3Touch a registered item ([1]s[3]).
≥Focus Transition will start. Focus will shift slowly from the
current position to the registered position. This will take a
few seconds. (l45)
≥As the focus shifts, the Focus Transition bar will move
from [S] to [E].
≥If you touch [INIT], focus will shift to the initial focus
position registered in Step 1 of “Registering a focus
position” (l43).
4Touch [EXIT] to exit Focus Transition.
≥Focus Transition is not available in the following cases:
jDuring Freeze Frame (l67)
jIn Intelligent Auto Mode
jWhen the FOCUS A/M/ ¶ switch is set to [A]
jWhen color bars are displayed.
jWhen a remote control (commercially-available) is conn ected (l6)
≥Focus Transition settings are canceled in the following cases. To use Focus Transition again,
register a focus position again. (l43)
jIf you operate the zoom
jIf you enable/disable [INFRARED REC] (l146)
≥You can switch between the items or exit Focus Transition by pressing the USER but tons 1s5.
Using Focus Transition
SE
252525
AFocus Transition bar
USER button Corresponding setting
USER1 to USER3 [1] to [3]
USER4 [INIT]
USER5 [EXIT]