[RING LED (BLUE)]
[ON]/[5 SEC.]/[OFF]
The ring LED lights up blue in Recording Mode.
≥When [5 SEC.] is set, the ring LED lights up for 5 seconds after the unit is turned on or the Recording Mode is switched.
≥When [RING LED (RED)] is set to [ON], the ring LED does not light up blue during recording.
[RING LED (RED)]
[ON]/[OFF]
The ring LED lights up red during recording.
≥When the [REC LAMP] is set to [OFF], this item cannot be set.
[CLOCK SET]
Set date and time. (l 27)
[TIME ZONE]
Set the time difference from Greenwich Mean Time. (l 27)
[SYSTEM FREQ]
Set the system frequency of this unit. Change the setting when creating a motion picture that has a broadcasting system different from that of your region.
[59.94Hz(NTSC)]: System frequency for regions where the TV broadcasting system is
NTSC
[50Hz(PAL)]: System frequency for regions where the TV broadcasting system is PAL
≥After you have changed the system frequency, this unit will be restarted.
≥By default, the system frequency is set to the broadcasting system of the region where this product was purchased.
≥This function’s default setting is [59.94Hz(NTSC)].
≥When [SYSTEM FREQ] is set to a broadcasting system different from that of your region, images may not be played back correctly on the TV.
≥If you are not familiar with broadcasting systems, we recommend that you use the default setting.
≥When recording with [REC MODE] set to [AVCHD], you cannot record scenes of different system frequencies into a single SD card. Use a different SD card for each system frequency.
- 159 -
