- 109 -
3Touch [RECORDER] on the screen of this unit.
When you select an option other than [RECORDER], recon nect the USB cable.
4Touch the media you wish to dub.
When using the battery, the LCD monitor turns off after about 5seconds. Touch the screen to turn
the LCD monitor on.
5Dubbing through operations on the Blu-ray disc recorder or high-definition

(AVCHD) compatible DVD recorder.

Do not touch [CHANGE MEDIA] on the screen of the unit during dubbing.
Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
For details on dubbing and playback methods, read t he operating instructions of the Blu-ray disc
recorder or DVD recorder.
When you connect the unit to a Blu-ray disc recorder, a dubbing o perations screen may appear
on the television connected to the Blu-ray disc recorder. In this case as well, per form the
operations of Steps 2 to 5.
You cannot switch the Recording Mode/Playback Mode by pressing the THUM BNAIL button on
this unit while the Blu-ray disc recorder or DVD recorder is connected. Disconnect the USB cable
before performing either of these operations.
If the battery runs down during dubbing, a message will appear. Operate the Blu-ray disc recorder
to cancel the dubbing.
About the screen indication of the un it
When the unit is accessing the SD card, card access icon ( ) appears on the unit screen or
the access lamp is on.
Be careful not to disconnect the USB cable, AC adaptor or batter y while the unit is accessing
the media, as this may result in the loss of recorded conte nt.