- 13 -
2 Attach an external microphone
(optional) to the microphone holder, and
tighten the microphone holder screws.
3 Connect the external microphone to the
AUDIO INPUT1 terminal (XLR 3 pin).
≥When wiring the microphone cable, use the cable
clamper of this unit.
∫Attaching the INPUT terminal capAttach the INPUT terminal cap while the audio input terminals 1 , 2 (XLR 3 pin) is not used.
∫Attaching the tripod≥There are tripod receptacle that are compatible with
1/4-20UNC screws.
≥Attaching a tripod with a screw length of 5.5 mm
(0.22 q) or more may damage the unit.
AMicrophone cable clamper
BMicrophone holder screws
CExternal microphone (optional)
DAUDIO INPUT1 terminal
(XLR 3 pin)
EINPUT terminal cap
FTripod receptacle