Panasonic HC-X1000 owner manual 117, Touch the wireless access point to connect Touch Enter

Press the USER button to which [Wi-Fi] is registered, and turn on the Wi-Fifunction.

If the device is Android (non-NFC-compatible) or iOS

Proceed to Step 6 when your Wi-Fi connection has been made via [Wireless Settings] in [Wi-Fi Setup] (l 125).

1 Connect the smartphone to a wireless access point.

2

≥ will be displayed.

3 Select the following menu items to set up a Wi-Fi connection between this unit and a wireless access point.

MENU : [Wi-Fi Setup] # [Wireless Settings]

≥Touch [OK].

4 Touch the wireless access point to connect.

5 Touch [ENTER].

≥ will be displayed when the connection between this unit and the wireless access point is complete.

≥To change the wireless access point to connect to, touch [Change AP], and add a wireless access point or perform operations in Steps 4s5. (l 129)

6 Start up the smartphone application “Image App”.

≥When the connection between this unit and the smartphone is complete, images stored on this unit are displayed on the smartphone screen.


		

A[Wireless Settings] B [RETURN]

C [Delete] D [ENTER]

To exit remote operation:

Touch [EXIT] on the screen of this unit or press the USER button to which [Wi-Fi] is registered.

≥The message is displayed. Touch [YES] to close the indication.

≥If you touch an NFC-compatible smartphone to this unit, you can register up to five smartphones. When the number exceeds five, registrations will be deleted, starting from the oldest touched one.

≥Please refer the instructions for the device you are using for information on how to set up and use a NFC-compatible smartphone.

- 117 -