Display
Messages
Major confirmation/error messages to be indicated on the screen in text.
CHECK CARD.
This card is not compatible or it cannot be recognized by the unit.
If this message appears even though motion pictures and still pictures are recorded on an SD card, the card may be unstable. Reinsert the SD card, then turn the unit off and then on again.
INVALID/CANNOT SET.
Since there is a condition to use the function, it is required to cancel/change other settings.
THIS EXTERNAL DRIVE CANNOT BE USED./
PLEASE CHECK THE EXTERNAL DRIVE.
The external drive that this unit cannot recognize is connected. Check if the USB HDD can be connected and used with this unit and try to reconnect. (l 102)
No wireless access point found/Connection failed. Please check network settings of connected device.
≥Check the
≥[WPS Connection] can establish a connection only between two devices: this unit and a device that will connect to this unit. Check if multiple devices are trying to establish a connection in the WPS waiting state simultaneously.
≥Read page 127 if the
About recovery
If faulty management information is found, the messages may appear and a repair is performed. (Repairing may take time depending on the error.)
≥
is displayed when abnormal management information is detected when the scenes are displayed in thumbnail.
≥Use a sufficiently charged battery or the AC adaptor.
≥Depending on the condition of the data, it may not be possible to completely repair the data.
≥If recovery fails, it will not be possible to play back scenes recorded before the unit turned off.
≥When data recorded on another device is recovered, it may not be possible to play back the data on this unit or the other device.
≥If recovery fails, turn the unit off and on again after waiting awhile. If recovery fails repeatedly, format a media on the unit. Please be aware that if a media is formatted, then all the data recorded on the media will be erased.
≥If the thumbnail information is recovered, displaying the thumbnails may become slower.
