- 169 -
Indication
Problem Check points
Function display
(Remaining Display,
Counter Display, etc.) is
not displayed.
≥[CARD & BATTERY] or [OTHERDISPLAY] of the
[DISP SETUP] is [OFF]. (l155)
≥Press the COUNTER button to switch the counter display.
(l57)
Recording
Problem Check points
The unit arbitrarily stops
recording.
≥Use an SD card that can be used for motion picture recording.
(l20)
≥The recordable time may have shortened due to the
deterioration of the data writing speed or repeated recording
and deletion. Using the unit, format the SD card. (l30)
Auto Focus function does
not work.
≥Switch to Intelligent Auto Mode.
≥If you are trying to record a scene which is hard to bring into
focus in Auto Focus Mode, use the Manual Focus Mode to
adjust the focus. (l35, 39)
Color or brightness of the
image changes, or you
may see horizontal bars in
the image.
The LCD monitor flickers
indoors.
≥Color or brightness of the image may change, or you may see
horizontal bars in the image when the object is recorded
under fluorescent light, mercury light or sodium light, etc., but
this is not a malfunction.
≥Record images in Intelligent Auto Mode or adjust the shutter
speed to 1/50, 1/60 or 1/100.
≥Adjust the Synchro Scan shutter speed. (l52)
Playback
Problem Check points
Scenes/still pictures
cannot be played back.
≥Any scenes/still pictures where the thumbnails are displayed
as cannot be played back.
Scenes/still pictures
cannot be deleted.
≥Release the protect setting. (l88)
≥Any scenes/still pictures where the thumbnails are displayed
as cannot be deleted. If the scenes/still pictures are
unnecessary, format the media to erase the data. (l30)
Please be aware that if a media is formatted then all the data
recorded on the media is erased and cannot be r ecovered.
Back up important data on a PC etc.