- 110 -
Dubbing using equipment without an SD card slot or a USB terminal,
or using a video device
You can dub by connecting an AV cable (commercially-available).
Images are dubbed in standard quality.
Use the AC adaptor to free you from worrying about the battery running down.
Press the THUMBNAIL button to switch this unit to the Playback Mode. (l22)
1Connect this unit to a video device and start playback on this unit.
2Start recording on the connected device.
To stop recording (dubbing), stop playback on this unit after stopping recording on the recorder.
When this unit and the TV are connected with an AV cable (comme rcially-available), even if you
set [HDMI RESOLUTION] (l92) to [DOWN CONV.], scenes in the recording format option [C4K/
24p 100M] cannot be output.
Some screens, such as the menu screen, may be displayed in reduced sizes on the TV.
If the date and time display and function indication are not wa nted, cancel them before dubbing.
(l92, 154)
Dubbing in standard picture quality
Change the video input on the
video device and TV that this
unit is connected to.
The channel set will differ depending on
the terminal to which the unit is
connected.
See the operating instructions of the
video device for details.
Insert the plugs as far as they will go.
AAV cable (commercially-available)
If the dubbed images are played back on a wide-screen TV, the images may be st retched
vertically.
In this case, refer to the operating instruction for the device you are connecting to or read the
operating instructions of the wide-screen TV and set the aspect r atio to 16:9.
VIDEO OUT
AUDIO OUT
L
R