Q-Logic 5602 manual Keywords add group, ISL Group Member Attributes

A

13 – Command Reference Group

Keywords add [group]

Initiates an editing session in which to specify a group member and its attributes for the existing group given by [group]. ISL, Port, and MS member attributes are described in Table 13-1, Table 13-2, and Table 13-3respectively. The group name and group type attributes are read-only fields common to all three tables.

	Table 13-1. ISL Group Member Attributes
Attribute		Description
Member	Worldwide name of the switch that would attach to the switch. A
	member cannot belong to more than one group.
Authentication	Enables (CHAP) or disables (None) authentication using the Chal-
	lenge Handshake Authentication Protocol (CHAP). The default is
	None.
Primary Hash	The preferred hash function to use to decipher the encrypted Pri-
	mary Secret sent by the ISL member. The hash functions are MD5
	or SHA-1. If the ISL member does not support the Primary Hash, the
	switch will use the Secondary Hash.
Primary Secret	Hexadecimal string that is encrypted by the Primary Hash for
	authentication with the ISL group member. The string has the follow-
	ing lengths depending on the Primary Hash function:
	„	MD5 hash: 16-byte
	„	SHA-1 hash: 20-byte
Secondary Hash	Hash function to use to decipher the encrypted Secondary Secret
	sent by the ISL group member. Hash values are MD5 or SHA-1. The
	Secondary Hash is used when the Primary Hash is not available on
	the ISL group member. The Primary Hash and the Secondary Hash
	cannot be the same.
Secondary	Hex string that is encrypted by the Secondary Hash and sent for
Secret	authentication. The string has the following lengths depending on
	the Secondary Hash function:
	„	MD5 hash: 16-byte
	„	SHA-1 hash: 20-byte
Binding	Domain ID of the switch to which to bind the ISL group member
	worldwide name. This option is available only if
	FabricBindingEnabled is set to True using the Set Config Security
	command. 0 (zero) specifies no binding.

59183-01 A 13-23