13 – Command Reference Set Port
S
Set Port
| Sets port state and speed for the specified port temporarily until the next switch |
| reset or new configuration activation. This command also clears port counters. |
Authority | Admin session |
Syntax | set port clear |
| or |
| set port [port_number] |
| bypass [alpa] |
| clear |
| enable |
| speed [transmission_speed] |
| state [state] |
Keywords | [port_number] |
| Specifies the port. Ports are numbered beginning with 0. |
| bypass [alpa] |
| Sends a Loop Port Bypass (LPB) to a specific Arbitrated Loop Physical Address |
| (ALPA) or to all ALPAs on the arbitrated loop. [alpa] can be a specific ALPA or the |
| keyword ALL to choose all ALPAs. |
| clear |
| Clears the counters on all ports or the port given by [port_number]. |
| enable |
| Sends a Loop Port Enable (LPE) to all ALPAs on the arbitrated loop. |
|
