Q-Logic 5602 manual Managing Security Sets, Create a Security Set, Delete a Security Set

9 – Device Security Configuration Managing Security Sets

S

9.5

Managing Security Sets

Managing Security Sets consists of the following tasks:

„Create a Security Set

„Delete a Security Set

„Rename a Security Set

„Copy a Security Set

„Add Groups to a Security Set

„Remove Groups from a Security Set

„Activate a Security Set

„Deactivate a Security Set

All of these tasks except Activate a Security Set and Deactivate a Security Set require a Security Edit session.

9.5.1

Create a Security Set

Enter the Securityset Create command to create a new security set as shown in the following example:

SANbox (admin-security) #> securityset create securityset_1

9.5.2

Delete a Security Set

Enter the Securityset Delete command to delete a security set as shown in the following example:

SANbox (admin-security) #> securityset delete securityset_1

9.5.3

Rename a Security Set

Enter the Securityset Rename command to rename a security set as shown in the following example:

SANbox (admin-security) #> securityset rename securityset_old securityset_new

9.5.4

Copy a Security Set

Enter the Securityset Copy command to copy a security set and its contents to a new security set as shown in the following example:

SANbox (admin-security) #> securityset copy securityset_1 securityset_2

9-10 59183-01 A