A

13 – Command Reference Set Port

speed [transmission_speed]

Specifies the transmission speed for the specified port. Choose one of the following port speed values:

1Gb/s

One gigabit per second.

2Gb/s

Two gigabits per second.

4Gb/s

Four gigabits per second.

10Gb/s

Ten gigabits per second. This applies only to ports 16–19.

Auto

The port speed is automatically detected.

state [state]

Specifies one of the following administrative states for the specified port:

Online

Activates and prepares the port to send data.

Offline

Prevents the port from receiving signal and accepting a device login.

Diagnostics

Prepares the port for testing and prevents the port from accepting a device login.

Down

Disables the port by removing power from the port lasers.

59183-01 A

13-83

Page 213
Image 213
Q-Logic 5602 manual Speed transmissionspeed, State state