Q-Logic 5602 manual Add Groups to a Security Set, Remove Groups from a Security Set

A

9 – Device Security Configuration Managing Security Sets

9.5.5

Add Groups to a Security Set

Enter the Securityset Add command to add a group to a security set as shown in the following example:

SANbox (admin-security) #> securityset add securityset_1 group_isl group_port

9.5.6

Remove Groups from a Security Set

Enter the Securityset Remove command to remove groups from a security set as shown in the following example:

SANbox (admin-security) #> sescurityset remove securityset_1 group_isl group_port

9.5.7

Activate a Security Set

Enter the Securityset Activate command to apply security to the fabric as shown in the following example:

SANbox (admin) #> securityset activate securityset_1

9.5.8

Deactivate a Security Set

Enter the Securityset Deactivate command to deactivate the active security set and disable security in the fabric:

SANbox (admin) #> securityset deactivate

59183-01 A 9-11