Q-Logic 5602 manual Before Reaching the end of the list

9 – Device Security Configuration Configuring the Security Database

S

To modify the security configuration, you must open an Admin session with the Admin Start command. An Admin session prevents other accounts from making changes at the same time either through Telnet or Enterprise Fabric Suite 2007. You must also open a Config Edit session with the Config Edit command and indicate which configuration you want to modify. If you do not specify a configuration name, the active configuration is assumed. The Config Edit session provides access to the Set Config Security command as shown in the following example:

SANbox #> admin start

SANbox (admin) #> config edit

SANbox (admin-config) #> set config security

A list of attributes	with formatting and current values will follow.
Enter a new value or	simply press the		ENTER key to accept the current value.
If you wish to terminate this		process	before	reaching the end of the list
press 'q' or 'Q' and	the ENTER key to		do so.
FabricBindingEnabled	(True /	False)	[False]
AutoSave	(True /	False)	[True ]
Finished configuring	attributes.		config	save command) and
This configuration must be saved (see
activated (see config activate command) before it can take effect.
To discard this configuration		use the	config	cancel command.

SANbox (admin-config)#> config save

SANbox (admin)#> config activate

SANbox (admin)#> admin end

9-8 59183-01 A