6 – Port Configuration Testing a Port
S
6.6.3
Display Port Test Results
You can display the test status while the test is in progress by entering the Test Status Port command as shown in the following example:
SANbox (admin) #> test status port 1 |
|
|
| ||
Port |
| Test | Test | Loop | Test |
Num | Port | Type | Status | Count | Failures |
1 | 1 | Offline Internal | Passed | 12 | 0 |
6.6.4
Cancel a Port Test
To cancel a port test that is in progress, enter the Test Cancel Port command.
|
