Q-Logic 5602 manual SANbox admin-config # set config threshold

A

6 – Port Configuration Configuring Port Threshold Alarms

Enter the Set Config Threshold command to enable and configure port threshold monitoring on the switch:

SANbox #> admin start
SANbox (admin) #> config edit
SANbox (admin-config) #> set config threshold
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the			current	value.
If you wish to terminate this process before reaching the end			of the list
press 'q' or 'Q' and the ENTER	key to do so.
ThresholdMonitoringEnabled	(True / False)	[False		]
CRCErrorsMonitoringEnabled	(True / False)	[True		]
RisingTrigger	(decimal value, 1-1000)	[25		]
FallingTrigger	(decimal value, 0-1000)	[1		]
SampleWindow	(decimal value, 1-1000 sec) [10			]
DecodeErrorsMonitoringEnabled	(True / False)	[True		]
RisingTrigger	(decimal value, 1-1000)	[25		]
FallingTrigger	(decimal value, 0-1000)	[0		]
SampleWindow	(decimal value, 1-1000 sec) [10			]
ISLMonitoringEnabled	(True / False)	[True		]
RisingTrigger	(decimal value, 1-1000)	[2		]
FallingTrigger	(decimal value, 0-1000)	[0		]
SampleWindow	(decimal value, 1-1000 sec) [10			]
LoginMonitoringEnabled	(True / False)	[True		]
RisingTrigger	(decimal value, 1-1000)	[5		]
FallingTrigger	(decimal value, 0-1000)	[1		]
SampleWindow	(decimal value, 1-1000 sec) [10			]
LogoutMonitoringEnabled	(True / False)	[True		]
RisingTrigger	(decimal value, 1-1000)	[5		]
FallingTrigger	(decimal value, 0-1000)	[1		]
SampleWindow	(decimal value, 1-1000 sec) [10			]
LOSMonitoringEnabled	(True / False)	[True		]
RisingTrigger	(decimal value, 1-1000)	[100		]
FallingTrigger	(decimal value, 0-1000)	[5		]
SampleWindow	(decimal value, 1-1000 sec) [10			]

Finished configuring attributes.

This configuration must be saved (see config save command) and activated (see config activate command) before it can take effect.

To discard this configuration use the config cancel command. SANbox (admin-config) #> config save

SANbox (admin-config) #> config activate

59183-01 A 6-11