Q-Logic 5602 manual Modify a Group Member, Remove Members from a Group

9 – Device Security Configuration Managing Groups

S

9.6.6

Modify a Group Member

Modifying a group member involves changing the member attributes. The member attributes define the authentication method, encryption methods, secrets, and fabric binding, depending on the group type.

„For ISL member attributes, refer to Table 13-1.

„For Port member attributes, refer to Table 13-2.

„For MS member attributes, refer to Table 13-3.

Enter the Group Edit command to change the attributes of a group member:

SANbox #> admin start

SANbox (admin) #> security edit

SANbox (admin-security) #> group edit G1 10:00:00:c0:dd:00:90:a3

A list of attributes with formatting and current values will follow.

Enter a new value	or simply press the	ENTER key to accept			the current value.
If you wish to terminate this process		before reaching the			end of the list
press 'q' or 'Q' and the ENTER key to		do so.
Group Name	g1
Group Type	ISL
Group Member	10:00:00:c0:dd:00:90:a3
Authentication	(None / Chap)		[None]		chap
PrimaryHash	(MD5 / SHA-1)		[MD5	]	sha-1
PrimarySecret	(40 hex or 20 ASCII	char value) [		]	12345678901234567890
SecondaryHash	(MD5 / SHA-1 / None)		[None]		md5
SecondarySecret	(32 hex or 16 ASCII	char value) [		]	1234567890123456
Binding	(domain ID 1-239, 0=None)		[3	]
Finished configuring attributes.		security cancel command.
To discard this configuration use the

9.6.7

Remove Members from a Group

Enter the Group Remove command to remove a member from a group as shown in the following example:

SANbox (admin-security) #> group remove group_1 10:00:00:c0:dd:00:90:a3

9-14 59183-01 A