13 – Command Reference Reset

S

factory

Resets switch configuration, port configuration, port threshold alarm configuration, zoning configuration, SNMP configuration, system configuration, security configuration, RADIUS configuration, switch services configuration, and zoning to the factory default values as described in Table 13-5through Table 13-13. The switch configuration is activated automatically.

NOTE:

„

Because this keyword changes network parameters, the

 

 

workstation could lose communication with the switch and

 

 

release the Admin session.

 

„

This keyword does not affect installed license keys.

port [port_list]

Reinitializes one or more ports given by [port_list]. [port_list] can be a set of port numbers and ranges delimited by spaces. For example, [0 2 10-15] specifies ports 0, 2, 10, 11, 12, 13, 14, and 15.

radius

Resets the RADIUS configuration to the default values as described in Table 13-10.

security

Clears the security database and deactivates the active security set. The security configuration value, autosave, and fabric binding remain unchanged.

services

Resets the switch services configuration to the default values as described in Table 13-11.

snmp

Resets the SNMP configuration settings to the factory default values. Refer to Table 13-9for SNMP configuration default values.

13-44

59183-01 A

Page 174
Image 174
Q-Logic 5602 manual Factory, Port portlist, Radius, Security, Services, Snmp