Manuals / Q-Logic / Computer Equipment / Switch

Q-Logic 5602 manual Set Config Switch, Syntax set config switch, Switch Configuration Parameters

Models: 5602

1 312

Download 312 pages 36.53 Kb

Page 200

13 – Command Reference Set Config Switch

S

Set Config Switch

Sets the switch configuration parameters. The changes you make with this command are not retained when you reset or power cycle the switch unless you save them using the Config Save command.

Authority Admin session and a Config Edit session

Syntax set config switch

This command initiates an editing session in which to change switch configuration settings. The system displays each parameter one line at a time and prompts you for a value. For each parameter, enter a new value or press the Enter key to accept the current value shown in brackets. Table 13-17describes the switch configuration parameters.

Table 13-17. Switch Configuration Parameters

Parameter	Description

AdminState	Switch administrative state.
	Online – Activates and prepares the ports to send data.
	This is the default.
	Offline – Prevents the ports from receiving signal and
	accepting a device login.
	Diagnostics – Prepares the ports for testing and prevents
	the ports from accepting a device login.
	Down – Disables the ports by removing power from the
	port lasers.
BroadcastEnabled	Broadcast. Enables (True) or disables (False) forwarding of
	broadcast frames. The default is True.
InbandEnabled	Inband management. Enables (True) or disables (False) the
	ability to manage the switch over an ISL. The default is True.
FDMIEnabled	Fabric Device Monitoring Interface. Enables (True) or dis-
	ables (False) the monitoring of target and initiator device
	information. The default is True.
FDMIEntries	The number of device entries to maintain in the FDMI data-
	base. Enter a number from 0–1000. The default is 1000.
DefaultDomainID	Default domain ID. The default is 1.
DomainIDLock	Prevents (True) or allows (False) dynamic reassignment of
	the domain ID. The default is False.

13-70

59183-01 A

Image 200

Q-Logic 5602 manual Set Config Switch, Syntax set config switch, Switch Configuration Parameters

Contents

Firmware Version Document Revision History Table of Contents Section Port Configuration Section Zoning Configuration Connection Security Configuration Section Device Security ConfigurationRadius Server Configuration Add Members to an Alias Remove Members from an AliasEvent Log Configuration Simple Network Management Protocol ConfigurationCommand Reference Section59183-01 a Index List of Tables Introduction Related Materials Switch Models and ExamplesIntended Audience New in This Release Training Technical SupportAvailability Contact Information Support HeadquartersIntroduction Technical Support 59183-01 a Command Line Interface Usage This section describes the following tasksLogging In to the Switch To log off, enter the Exit commandCommand-Line Completion Opening and Closing an Admin SessionEntering Commands Setting Page Breaks Getting HelpCreating a Support File Local directory now /itasca/conf/images binFtp Downloading and Uploading Files Userimages password images User Account Configuration Factory User AccountsDisplaying User Account Information Creating User Accounts Modifying User Accounts and Passwords Following example deletes the user account named user3Network and Fabric Configuration Displaying Name Server Information Displaying the Ethernet Network Configuration WWNConfiguring the Ethernet Port Following is an example of a connection failure Verifying a Switch in the NetworkVerifying and Tracing Fibre Channel Connections Port Displaying Switch Information Switch configuration consists of the following tasksSwitch Operational Information System Process Information PID Ppid CPU TimeElapsed Time Between Resets Configuration Information Switch Configuration ParametersZoning Configuration Parameters Security Configuration ParametersHardware Information Heartbeat LED ActivityFirmware Information Managing Switch Services Please Note Activate a Switch Configuration Managing Switch ConfigurationsDisplay a List of Switch Configurations Modify a Switch Configuration Copy a Switch ConfigurationDelete a Switch Configuration Decimal value, 100-100000 msec Back Up and Restore a Switch Configuration Creating the Backup FileDownloading the Configuration File Restoring the Configuration File Ftp ipaddress user images password images ftp binPaging a Switch Setting the Date and TimeSwitch Configuration Setting the Date and Time List Switch Reset Methods Resetting a SwitchInstalling Firmware One-Step Firmware Installation Nondisruptive ActivationEnter the password for your account name FTP only Custom Firmware Installation Wait for the unpack to completeManaging Switch Feature Upgrades Display Feature LicensesInstall a Feature License Key Page You can display the following port information Displaying Port InformationThis section describes the following topics Port Configuration Parameters ArbffPort Operational Information PL-XPL-VC-SG3-22Port Threshold Alarm Configuration Parameters Port Performance Transceiver Information FTRJ8524P2BNLModifying Port Operating Characteristics Set config portPort Binding Resetting a Port SANbox admin-config # set config security portConfiguring Port Threshold Alarms SANbox admin-config # set config threshold Testing a Port Online Tests for PortsOffline Tests for Ports Cancel a Port Test Display Port Test ResultsExtending Port Transmission Distance Current valueSANbox # show donor Port Config Zoning Configuration Configured Zone Set Information Displaying Zoning Database InformationSANbox # zoning list Active ZoneSet Information Active Zone Set Information Zone Set Membership Information Zone Membership InformationAlias and Alias Membership Information Zoning Modification History Zoning Database Limits E2JBOD2Configuring the Zoning Database SANbox # admin start SANbox admin # config edit Modifying the Zoning Database Resetting the Zoning Database Removing Inactive Zone Sets, Zones, and AliasesManaging Zone Sets Create a Zone SetDelete a Zone Set Managing Zone Sets consists of the following tasksRename a Zone Set Copy a Zone SetAdd Zones to a Zone Set Remove Zones from a Zone SetDeactivate a Zone Set Managing ZonesCreate a Zone Delete a ZoneRename a Zone Copy a ZoneAdd Members to a Zone Remove Members from a ZoneManaging Aliases Create an AliasDelete an Alias Rename an AliasRemove Members from an Alias Copy an AliasAdd Members to an Alias Connection Security Configuration Managing SSL and SSH ServicesTelnetEnabled True / False SSHEnabled Displaying SSL and SSH Services Creating an SSL Security CertificatePage Device Security Configuration Configured Security Set Information Displaying Security Database InformationMD5 Active Security Set Information Security Set Membership Information Group Membership InformationSecurity Database Modification History Security Database LimitsConfiguring the Security Database Set Config Security commandBefore Reaching the end of the list Resetting the Security Database Modifying the Security DatabaseManaging Security Sets Create a Security SetDelete a Security Set Rename a Security SetAdd Groups to a Security Set Remove Groups from a Security SetActivate a Security Set Deactivate a Security SetManaging Groups Create a GroupDelete a Group Rename a GroupCopy a Group Add Members to a GroupModify a Group Member Remove Members from a GroupRadius Server Configuration Displaying Radius Server Information Configuring a Radius Server on the Switch Page Event Log Configuration Starting and Stopping Event LoggingDisplaying the Event Log Filtering the Event Log Display Controlling Messages in the Output StreamManaging the Event Log Configuration Configure the Event LogClearing the Event Log Display the Event Log ConfigurationRestore the Event Log Configuration Logging to a Remote Host Creating and Downloading a Log File Page Managing the Snmp Service You control the Snmp service SNMPEnabled parameters through12-2 59183-01 a Displaying Snmp Information Modifying the Snmp Configuration Resetting the Snmp Configuration SANbox admin # reset snmpPage Command Reference Access AuthorityCommand Syntax and KeywordsCommand Listing Commands are listed in alphabetical order as followsAdmin AuthoritySyntax KeywordsAlias Syntax aliasKeywords add alias memberlist Copy aliassource aliasdestinationDelete alias ListMembers alias Remove alias memberlistKeywords activate configname ConfigSyntax config Save configname Edit confignameRestore 59183-01 a 13-9 Support CreateKeywords certificate 59183-01 a 13-11 Following is an example of the Create Certificate command SANbox admin # create supportKeywords MMDDhhmmCCYY DateSyntax date Closes the Telnet session ExitAuthority None Syntax exit Keywords address FcpingAuthority None Hopcount FctracePortdestination Examples The following is an example of the Fctrace command Feature Syntax featureAdd licensekey log Keywords add licensekeyFollowing is an example of the Feature Log command Firmware Install Syntax firmware install59183-01 a 13-21 Group Syntax groupKeywords add group ISL Group Member AttributesPort Group Member Attributes Configures security for attachments to other switches MS Group Member AttributesCopy groupsource groupdestination Create group typeEdit group member Group Member AttributesMembers group Remove group memberlistRename groupold groupnew Securitysets groupFollowing is an example of the Group Edit command Following is an example of the Group List command Following is an example of the Group Members commandHardreset Syntax hardresetHelp command keyword CommandHelp KeywordRe-execute selected commands Following is an example of the History commandHistory HistoryHotreset HotresetSyntax image Keywords cleanupImage Unpack file 13-36 59183-01 a Following is an example of the Lip command LipReinitializes the specified loop port Lip portnumberLogout Authority None Syntax logoutPasswd Syntax passwd accountname Keywords accountnameIpaddress PingPing ipaddress Displays current system process information Examples The following is an example of the Ps commandAuthority None Syntax ps Quit Authority None Syntax quitKeywords config configname ResetSyntax reset Services FactoryPort portlist RadiusSwitch Workstation could lose communication with the switchSystem ZoningSwitch Configuration Defaults ValuesPort Configuration Defaults Parameter 4-Gbps Port DefaultsPort Threshold Alarm Configuration Defaults Zoning Configuration Defaults Snmp Configuration Defaults10. Radius Configuration Defaults 11. Services Configuration Defaults12. System Configuration Defaults 13. Security Configuration DefaultsClear SecurityKeywords active Save EditLimits Following is an example of the Security History command Following is an example of the Security Limits command Following is an example of the Security List commandSecurityset Syntax securitysetKeywords activate securityset ActiveCopy securitysetsource securitysetdestination Create securitysetDeactivate Delete securitysetFollowing is an example of the Securityset Groups command Following is an example of the Securityset List commandSet Alarm Syntax set alarm optionKeywords option Option can be one of the followingState Set BeaconSet beacon state Set Config Port 14. Port Configuration ParametersKeywords port portnumber Ports portnumberSend Arbff True instead of IDLEs False on the loop 14. Port Configuration Parameters 14. Port Configuration Parameters 59183-01 a 13-65 13-66 59183-01 a 15. Security Configuration Parameters Set Config SecuritySyntax set config security 13-68 59183-01 a Set Config Security Portbinding 16. Port Binding Configuration Parameters17. Switch Configuration Parameters Set Config SwitchSyntax set config switch Resource Allocation Timeout Value. The number of millisec 18. Port Alarm Threshold Parameters Set Config ThresholdSyntax set config threshold Error rate has fallen below the falling trigger Following is an example of the Set Config Threshold command19. Zoning Configuration Parameters Set Config ZoningSyntax set config zoning 59183-01 a 13-75 Set Log Set logArchive Component filterlistDisplay filter Disables monitoring on all ports Level filterMonitors none of the severity levels Specifies all portsAlarms are always logged and always displayed on the screen StartStop Stops logging of eventsSyntax pagebreak state Set PagebreakKeywords state 59183-01 a 13-81 Enable Set PortSet port clear Set port portnumberSpeed transmissionspeed State stateSet Setup Radius Configures Radius servers on the switchSet setup radius Configuration fields20. Radius Service Settings 13-86 59183-01 a Set Setup Services Configures services on the switchSyntax set setup services 21. Switch Services Settings21. Switch Services Settings 59183-01 a 13-89 Set Setup Snmp Configures Snmp on the switchSyntax set setup snmp 22. Snmp Configuration Settings22. Snmp Configuration Settings 13-92 59183-01 a 23. System Configuration Settings Set Setup SystemSyntax set setup system 13-94 59183-01 a Set Switch State Admin sessionSet switch state state State can be one of the followingSet Timezone Set timezoneShow about Show AboutAuthority None Syntax Show Alarm Show alarmSettings Following is an example of the Show Alarm commandShow Broadcast Syntax show broadcastShow chassis Displays chassis component status and temperatureShow Chassis Show Config Port Displays configuration parameters for one or more portsShow config port portnumber Portnumber13-102 59183-01 a Syntax show config security Show Config SecurityDisplays the security database configuration parameters Show Config Security Portbinding Show config security portbinding portnumberSyntax show config switch Show Config SwitchDisplays the switch configuration parameters Syntax show config threshold Show Config ThresholdDisplays alarm threshold parameters for the switch Syntax show config zoning Show Config ZoningDisplays zoning configuration parameters for the switch Show Domains Syntax show domainsShow Donor Show donorShow Fabric Show fabricShow Fdmi Show fdmi portwwnPortwwn Question marks ?Following is an example of the Show Fdmi WWN command Syntax show interface Show InterfaceDisplays the status of the active network interfaces Show Log Show logNumberofevents ComponentLevel OptionsSettings Following is an example of the Show Log Level commandFollowing is an example of the Show Log Options command PortShow lsdb Show LsdbDisplays Link State database information Installed Show MediaShow media Portlist25. Transceiver Information 13-120 59183-01 a 59183-01 a 13-121 Following is an example of the Show Mem command Show MemDisplays information about memory activity Show mem countOption Show NSShow ns option Following is an example of the Show NS portID command Syntax show pagebreak Displays the current pagebreak settingShow Pagebreak Show Perf Syntax show perf portlistKeywords portlist Byte portlistErrors portlist Outbyte portlistFrame portlist Inframe portlistFollowing is an example of the Show Perf Byte command 26. Show Port Parameters Show PortShow port Lipalpdalps LIPF7F7 26. Show Port Parameters 59183-01 a 13-133 Show Post Log Syntax show post logSyntax show setup mfg Show Setup MfgDisplays manufacturing information about the switch Displays Radius server information Show Setup RadiusSyntax show setup radius Syntax show setup services Show Setup ServicesDisplays switch service status information Show Setup Snmp Displays the current Snmp settingsSyntax show setup snmp Following is an example of the Show Setup Snmp commandSyntax show setup system Show Setup SystemDisplays the current system settings Domainid Show SteeringShow steering domainid Show Switch Displays switch operational informationShow switch 27. Switch Operational Parameters13-142 59183-01 a Syntax show timezone Displays the current time zone settingShow Timezone Syntax show topology Show TopologyDisplays all connected devices 59183-01 a 13-145 Show Users Show usersShow Version Shutdown Syntax shutdownPort portnumber Test CancelTest cancel Test Port Syntax test port portnumberOffline loopbacktype Online28. Port Test Parameters 13-152 59183-01 a Test Status Test statusAuthority None Syntax uptime Examples The following is an example of the Uptime commandUptime User Syntax userKeywords accounts AddFollowing is an example of the User Add command Following is an example of the User Edit commandFollowing is an example of the User Delete command Following is an example of the User List commandAuthority None Syntax whoami Examples The following is an example of the Whoami commandWhoami Zone Syntax zoneKeywords add zone memberlist Copy zonesource zonedestinationDelete zone Members zoneRemove zone memberlist Rename zoneold zonenewFollowing is an example of the Zone Members command Following is an example of the Zone Zonesets command Zoneset Syntax zonesetDelete zoneset Remove zoneset zonelistRename zonesetold zonesetnew Zones zonesetFollowing is an example of the Zoneset List command Following is an example of the Zoneset Zones commandDelete orphans ZoningSyntax zoning Opens a Zoning Edit session 29. Zoning Database Limits13-168 59183-01 a Following is an example of the Zoning Limits command Following is an example of the Zoning List command Index Index-2 59183-01 a Example FTP See File Transfer ProtocolIndex-4 59183-01 a 59183-01 a Index-5 Index-6 59183-01 a Set Config Security Port command Show Config Security Port command 59183-01 a Index-9 Index-10 59183-01 a 59183-01 a Index-11