Q-Logic 5602 manual Deactivate a Zone Set, Managing Zones, Create a Zone, Delete a Zone

A

7 – Zoning Configuration Managing Zones

7.6.8

Deactivate a Zone Set

Enter the Zoneset Deactivate command to deactivate the active zone set and disable zoning in the fabric:

SANbox #> admin start

SANbox (admin) #> zoneset deactivate

7.7

Managing Zones

Managing Zones consists of the following tasks:

„Create a Zone

„Delete a Zone

„Rename a Zone

„Copy a Zone

„Add Members to a Zone

„Remove Members from a Zone

All of these tasks require an Admin session and a Zoning Edit session.

7.7.1

Create a Zone

Enter the Zone Create command to create a new zone as shown in the following example:

SANbox #> admin start
SANbox (admin) #> zoning	edit
SANbox (admin-zoning) #>	zone	create zone_1
SANbox (admin-zoning) #>	zoning save

7.7.2

Delete a Zone

Enter the Zone Delete command to delete zone_1 from the zoning database as shown in the following example:

SANbox #> admin start
SANbox (admin) #> zoning	edit
SANbox (admin-zoning) #>	zone	delete zone_1
SANbox (admin-zoning) #>	zoning save

59183-01 A 7-15