Manuals / Q-Logic / Computer Equipment / Switch

Q-Logic 5602 Delete zoneset, Remove zoneset zonelist, Rename zonesetold zonesetnew, Zones zoneset

Models: 5602

1 312

Download 312 pages 36.53 Kb

Page 294

13 – Command Reference Zoneset

S

deactivate

Deactivates the active zone set. Close the Zoning Edit session before using this keyword.

delete [zone_set]

Deletes the zone set given by [zone_set]. If the specified zone set is active, the command is suspended until the zone set is deactivated.

list

Displays a list of all zone sets. This keyword does not require an Admin session.

remove [zone_set] [zone_list]

Removes a list of zones given by [zone_list] from the zone set given by

[zone_set]. Use a <space> to delimit zone names in [zone_list]. If [zone_set] is the active zone set, the zone will not be removed until the zone set has been deactivated.

rename [zone_set_old] [zone_set_new]

Renames the zone set given by [zone_set_old] to the name given by [zone_set_new]. You can rename the active zone set.

zones [zone_set]

Displays all zones that are components of the zone set given by [zone_set]. This keyword does not require an Admin session.

Notes		A zone set must be active for its definitions to be applied to the fabric.
		Only one zone set can be active at one time.
		A zone can be a component of more than one zone set.

13-164

59183-01 A

Image 294

Q-Logic 5602 manual Delete zoneset, Remove zoneset zonelist, Rename zonesetold zonesetnew, Zones zoneset

Contents

Firmware Version Document Revision History Table of Contents Section Port Configuration Section Zoning Configuration Radius Server Configuration Connection Security ConfigurationSection Device Security Configuration Add Members to an Alias Remove Members from an AliasCommand Reference Event Log ConfigurationSimple Network Management Protocol Configuration Section59183-01 a Index List of Tables Introduction Switch Models and Examples Intended AudienceRelated Materials New in This Release Technical Support AvailabilityTraining Contact Information Support HeadquartersIntroduction Technical Support 59183-01 a Command Line Interface Usage This section describes the following tasksLogging In to the Switch To log off, enter the Exit commandOpening and Closing an Admin Session Entering CommandsCommand-Line Completion Setting Page Breaks Getting HelpCreating a Support File Local directory now /itasca/conf/images binFtp Downloading and Uploading Files Userimages password images User Account Configuration Factory User AccountsDisplaying User Account Information Creating User Accounts Modifying User Accounts and Passwords Following example deletes the user account named user3Network and Fabric Configuration Displaying Name Server Information Displaying the Ethernet Network Configuration WWNConfiguring the Ethernet Port Verifying a Switch in the Network Verifying and Tracing Fibre Channel ConnectionsFollowing is an example of a connection failure Port Displaying Switch Information Switch configuration consists of the following tasksSwitch Operational Information System Process Information PID Ppid CPU TimeElapsed Time Between Resets Configuration Information Switch Configuration ParametersZoning Configuration Parameters Security Configuration ParametersHardware Information Heartbeat LED ActivityFirmware Information Managing Switch Services Please Note Managing Switch Configurations Display a List of Switch ConfigurationsActivate a Switch Configuration Copy a Switch Configuration Delete a Switch ConfigurationModify a Switch Configuration Decimal value, 100-100000 msec Back Up and Restore a Switch Configuration Creating the Backup FileDownloading the Configuration File Restoring the Configuration File Ftp ipaddress user images password images ftp binPaging a Switch Setting the Date and TimeSwitch Configuration Setting the Date and Time List Resetting a Switch Installing FirmwareSwitch Reset Methods One-Step Firmware Installation Nondisruptive ActivationEnter the password for your account name FTP only Custom Firmware Installation Wait for the unpack to completeManaging Switch Feature Upgrades Display Feature LicensesInstall a Feature License Key Page Displaying Port Information This section describes the following topicsYou can display the following port information Port Configuration Parameters ArbffPort Operational Information PL-XPL-VC-SG3-22Port Threshold Alarm Configuration Parameters Port Performance Transceiver Information FTRJ8524P2BNLModifying Port Operating Characteristics Set config portPort Binding Resetting a Port SANbox admin-config # set config security portConfiguring Port Threshold Alarms SANbox admin-config # set config threshold Testing a Port Online Tests for PortsOffline Tests for Ports Cancel a Port Test Display Port Test ResultsExtending Port Transmission Distance Current valueSANbox # show donor Port Config Zoning Configuration Configured Zone Set Information Displaying Zoning Database InformationSANbox # zoning list Active ZoneSet Information Active Zone Set Information Zone Set Membership Information Zone Membership InformationAlias and Alias Membership Information Zoning Modification History Zoning Database Limits E2JBOD2Configuring the Zoning Database SANbox # admin start SANbox admin # config edit Modifying the Zoning Database Resetting the Zoning Database Removing Inactive Zone Sets, Zones, and AliasesDelete a Zone Set Managing Zone SetsCreate a Zone Set Managing Zone Sets consists of the following tasksAdd Zones to a Zone Set Rename a Zone SetCopy a Zone Set Remove Zones from a Zone SetCreate a Zone Deactivate a Zone SetManaging Zones Delete a ZoneAdd Members to a Zone Rename a ZoneCopy a Zone Remove Members from a ZoneDelete an Alias Managing AliasesCreate an Alias Rename an AliasCopy an Alias Add Members to an AliasRemove Members from an Alias Connection Security Configuration Managing SSL and SSH ServicesTelnetEnabled True / False SSHEnabled Displaying SSL and SSH Services Creating an SSL Security CertificatePage Device Security Configuration Configured Security Set Information Displaying Security Database InformationMD5 Active Security Set Information Security Set Membership Information Group Membership InformationSecurity Database Modification History Security Database LimitsConfiguring the Security Database Set Config Security commandBefore Reaching the end of the list Resetting the Security Database Modifying the Security DatabaseDelete a Security Set Managing Security SetsCreate a Security Set Rename a Security SetActivate a Security Set Add Groups to a Security SetRemove Groups from a Security Set Deactivate a Security SetDelete a Group Managing GroupsCreate a Group Rename a GroupCopy a Group Add Members to a GroupModify a Group Member Remove Members from a GroupRadius Server Configuration Displaying Radius Server Information Configuring a Radius Server on the Switch Page Event Log Configuration Starting and Stopping Event LoggingDisplaying the Event Log Filtering the Event Log Display Controlling Messages in the Output StreamManaging the Event Log Configuration Configure the Event LogDisplay the Event Log Configuration Restore the Event Log ConfigurationClearing the Event Log Logging to a Remote Host Creating and Downloading a Log File Page Managing the Snmp Service You control the Snmp service SNMPEnabled parameters through12-2 59183-01 a Displaying Snmp Information Modifying the Snmp Configuration Resetting the Snmp Configuration SANbox admin # reset snmpPage Command Reference Access AuthorityCommand Syntax and KeywordsCommand Listing Commands are listed in alphabetical order as followsSyntax AdminAuthority KeywordsKeywords add alias memberlist AliasSyntax alias Copy aliassource aliasdestinationMembers alias Delete aliasList Remove alias memberlistConfig Syntax configKeywords activate configname Edit configname RestoreSave configname 59183-01 a 13-9 Create Keywords certificateSupport 59183-01 a 13-11 Following is an example of the Create Certificate command SANbox admin # create supportDate Syntax dateKeywords MMDDhhmmCCYY Exit Authority None Syntax exitCloses the Telnet session Fcping Authority NoneKeywords address Fctrace PortdestinationHopcount Examples The following is an example of the Fctrace command Add licensekey log FeatureSyntax feature Keywords add licensekeyFollowing is an example of the Feature Log command Firmware Install Syntax firmware install59183-01 a 13-21 Group Syntax groupKeywords add group ISL Group Member AttributesPort Group Member Attributes Copy groupsource groupdestination Configures security for attachments to other switchesMS Group Member Attributes Create group typeEdit group member Group Member AttributesRename groupold groupnew Members groupRemove group memberlist Securitysets groupFollowing is an example of the Group Edit command Following is an example of the Group List command Following is an example of the Group Members commandHardreset Syntax hardresetHelp Help command keywordCommand KeywordHistory Re-execute selected commandsFollowing is an example of the History command HistoryHotreset HotresetKeywords cleanup ImageSyntax image Unpack file 13-36 59183-01 a Reinitializes the specified loop port Following is an example of the Lip commandLip Lip portnumberLogout Authority None Syntax logoutPasswd Syntax passwd accountname Keywords accountnamePing Ping ipaddressIpaddress Examples The following is an example of the Ps command Authority None Syntax psDisplays current system process information Quit Authority None Syntax quitReset Syntax resetKeywords config configname Port portlist ServicesFactory RadiusSystem SwitchWorkstation could lose communication with the switch ZoningSwitch Configuration Defaults ValuesPort Configuration Defaults Parameter 4-Gbps Port DefaultsPort Threshold Alarm Configuration Defaults Zoning Configuration Defaults Snmp Configuration Defaults10. Radius Configuration Defaults 11. Services Configuration Defaults12. System Configuration Defaults 13. Security Configuration DefaultsSecurity Keywords activeClear Edit LimitsSave Following is an example of the Security History command Following is an example of the Security Limits command Following is an example of the Security List commandKeywords activate securityset SecuritysetSyntax securityset ActiveDeactivate Copy securitysetsource securitysetdestinationCreate securityset Delete securitysetFollowing is an example of the Securityset Groups command Following is an example of the Securityset List commandKeywords option Set AlarmSyntax set alarm option Option can be one of the followingSet Beacon Set beacon stateState Keywords port portnumber Set Config Port14. Port Configuration Parameters Ports portnumberSend Arbff True instead of IDLEs False on the loop 14. Port Configuration Parameters 14. Port Configuration Parameters 59183-01 a 13-65 13-66 59183-01 a Set Config Security Syntax set config security15. Security Configuration Parameters 13-68 59183-01 a Set Config Security Portbinding 16. Port Binding Configuration ParametersSet Config Switch Syntax set config switch17. Switch Configuration Parameters Resource Allocation Timeout Value. The number of millisec Set Config Threshold Syntax set config threshold18. Port Alarm Threshold Parameters Error rate has fallen below the falling trigger Following is an example of the Set Config Threshold commandSet Config Zoning Syntax set config zoning19. Zoning Configuration Parameters 59183-01 a 13-75 Archive Set LogSet log Component filterlistDisplay filter Monitors none of the severity levels Disables monitoring on all portsLevel filter Specifies all portsStop Alarms are always logged and always displayed on the screenStart Stops logging of eventsSet Pagebreak Keywords stateSyntax pagebreak state 59183-01 a 13-81 Set port clear EnableSet Port Set port portnumberSpeed transmissionspeed State stateSet setup radius Set Setup RadiusConfigures Radius servers on the switch Configuration fields20. Radius Service Settings 13-86 59183-01 a Syntax set setup services Set Setup ServicesConfigures services on the switch 21. Switch Services Settings21. Switch Services Settings 59183-01 a 13-89 Syntax set setup snmp Set Setup SnmpConfigures Snmp on the switch 22. Snmp Configuration Settings22. Snmp Configuration Settings 13-92 59183-01 a Set Setup System Syntax set setup system23. System Configuration Settings 13-94 59183-01 a Set switch state state Set Switch StateAdmin session State can be one of the followingSet Timezone Set timezoneShow About Authority None SyntaxShow about Settings Show AlarmShow alarm Following is an example of the Show Alarm commandShow Broadcast Syntax show broadcastDisplays chassis component status and temperature Show ChassisShow chassis Show config port portnumber Show Config PortDisplays configuration parameters for one or more ports Portnumber13-102 59183-01 a Show Config Security Displays the security database configuration parametersSyntax show config security Show Config Security Portbinding Show config security portbinding portnumberShow Config Switch Displays the switch configuration parametersSyntax show config switch Show Config Threshold Displays alarm threshold parameters for the switchSyntax show config threshold Show Config Zoning Displays zoning configuration parameters for the switchSyntax show config zoning Show Domains Syntax show domainsShow Donor Show donorShow Fabric Show fabricPortwwn Show FdmiShow fdmi portwwn Question marks ?Following is an example of the Show Fdmi WWN command Show Interface Displays the status of the active network interfacesSyntax show interface Numberofevents Show LogShow log ComponentLevel OptionsFollowing is an example of the Show Log Options command SettingsFollowing is an example of the Show Log Level command PortShow Lsdb Displays Link State database informationShow lsdb Show media InstalledShow Media Portlist25. Transceiver Information 13-120 59183-01 a 59183-01 a 13-121 Displays information about memory activity Following is an example of the Show Mem commandShow Mem Show mem countShow NS Show ns optionOption Following is an example of the Show NS portID command Displays the current pagebreak setting Show PagebreakSyntax show pagebreak Keywords portlist Show PerfSyntax show perf portlist Byte portlistFrame portlist Errors portlistOutbyte portlist Inframe portlistFollowing is an example of the Show Perf Byte command Show Port Show port26. Show Port Parameters Lipalpdalps LIPF7F7 26. Show Port Parameters 59183-01 a 13-133 Show Post Log Syntax show post logShow Setup Mfg Displays manufacturing information about the switchSyntax show setup mfg Show Setup Radius Syntax show setup radiusDisplays Radius server information Show Setup Services Displays switch service status informationSyntax show setup services Syntax show setup snmp Show Setup SnmpDisplays the current Snmp settings Following is an example of the Show Setup Snmp commandShow Setup System Displays the current system settingsSyntax show setup system Show Steering Show steering domainidDomainid Show switch Show SwitchDisplays switch operational information 27. Switch Operational Parameters13-142 59183-01 a Displays the current time zone setting Show TimezoneSyntax show timezone Show Topology Displays all connected devicesSyntax show topology 59183-01 a 13-145 Show Users Show usersShow Version Shutdown Syntax shutdownTest Cancel Test cancelPort portnumber Offline loopbacktype Test PortSyntax test port portnumber Online28. Port Test Parameters 13-152 59183-01 a Test Status Test statusExamples The following is an example of the Uptime command UptimeAuthority None Syntax uptime Keywords accounts UserSyntax user AddFollowing is an example of the User Add command Following is an example of the User Edit commandFollowing is an example of the User Delete command Following is an example of the User List commandExamples The following is an example of the Whoami command WhoamiAuthority None Syntax whoami Keywords add zone memberlist ZoneSyntax zone Copy zonesource zonedestinationRemove zone memberlist Delete zoneMembers zone Rename zoneold zonenewFollowing is an example of the Zone Members command Following is an example of the Zone Zonesets command Zoneset Syntax zonesetRename zonesetold zonesetnew Delete zonesetRemove zoneset zonelist Zones zonesetFollowing is an example of the Zoneset List command Following is an example of the Zoneset Zones commandZoning Syntax zoningDelete orphans Opens a Zoning Edit session 29. Zoning Database Limits13-168 59183-01 a Following is an example of the Zoning Limits command Following is an example of the Zoning List command Index Index-2 59183-01 a Example FTP See File Transfer ProtocolIndex-4 59183-01 a 59183-01 a Index-5 Index-6 59183-01 a Set Config Security Port command Show Config Security Port command 59183-01 a Index-9 Index-10 59183-01 a 59183-01 a Index-11