Q-Logic 5602 manual Managing the Event Log Configuration, Configure the Event Log

11 – Event Log Configuration Managing the Event Log Configuration

S

11.3

Managing the Event Log Configuration

Managing the Event Log Configuration consists of the following tasks:

„Configure the Event Log

„Display the Event Log Configuration

„Restore the Event Log Configuration

11.3.1

Configure the Event Log

You can customize what events are recorded in the switch event log according to component, severity level, and port. Enter the Set Log Component, Set Log Level, and Set Log Port commands to filter the events to be recorded. You can choose from the following component events:

„E_Port events

„Management server events

„Name server events

„Port events

„Switch management events

„Simple Network Management Protocol (SNMP) events

„Zoning events

The following example configures the event log to record switch management events with warning and critical severity levels associated with ports 0–3. Entering the Set Log Save command ensures that this configuration is preserved across switch resets.

SANbox (admin) #> set log component switch

SANbox (admin) #> set log level warn

SANbox (admin) #> set log port 0 1 2 3

SANbox (admin) #> set log save

11-4 59183-01 A