Manuals / Q-Logic / Computer Equipment / Switch

Q-Logic 5602 manual Fcping, Authority None, Keywords address

Models: 5602

1 312

Download 312 pages 36.53 Kb

Page 145

A

13 – Command Reference Fcping

Fcping

NOTE: This command requires the SANdoctor license key. To purchase a license key, contact your authorized maintenance provider or authorized reseller. Use the Feature command to install a license key.

Verifies a Fibre Channel connection with another switch or a device and reports status.

Authority None

Syntax fcping destination [address]

count [number] timeout [seconds]

Keywords [address]

The address of the port or device with which to verify the Fibre Channel connection. [address] can have one of the following formats:

6-character hexadecimal device Fibre Channel address (hex). Enter addresses with or without the “0x” prefix.

16-character hexadecimal worldwide port name (WWPN) with the format xx:xx:xx:xx:xx:xx:xx:xx or xxxxxxxxxxxxxxxx.

count [number]

Number of times given by [number] to repeat the command. If you omit this keyword, the command is repeated once.

timeout [seconds]

Number of seconds given by [seconds] to wait for a response. If you omit this keyword, the switch waits 1 second for a response.

Examples The following is an example of the Fcping command:

SANbox #> fcping 970400 count					3
28	bytes from local switch to				0x970400	time = 10			usec
28	bytes from	local	switch	to	0x970400	time	=	11	usec
28	bytes from	local	switch	to	0x970400	time	=	119 usec

59183-01 A

13-15

Image 145

Q-Logic 5602 manual Fcping, Authority None, Keywords address

Contents

Firmware Version Document Revision History Table of Contents Section Port Configuration Section Zoning Configuration Section Device Security Configuration Connection Security ConfigurationRadius Server Configuration Add Members to an Alias Remove Members from an AliasSimple Network Management Protocol Configuration Event Log ConfigurationCommand Reference Section59183-01 a Index List of Tables Introduction Intended Audience Switch Models and ExamplesRelated Materials New in This Release Availability Technical SupportTraining Support Headquarters Contact InformationIntroduction Technical Support 59183-01 a This section describes the following tasks Command Line Interface UsageTo log off, enter the Exit command Logging In to the SwitchEntering Commands Opening and Closing an Admin SessionCommand-Line Completion Getting Help Setting Page BreaksLocal directory now /itasca/conf/images bin Creating a Support FileFtp Downloading and Uploading Files Userimages password images Factory User Accounts User Account ConfigurationDisplaying User Account Information Creating User Accounts Following example deletes the user account named user3 Modifying User Accounts and PasswordsNetwork and Fabric Configuration Displaying Name Server Information WWN Displaying the Ethernet Network ConfigurationConfiguring the Ethernet Port Verifying and Tracing Fibre Channel Connections Verifying a Switch in the NetworkFollowing is an example of a connection failure Port Switch configuration consists of the following tasks Displaying Switch InformationSwitch Operational Information PID Ppid CPU Time System Process InformationElapsed Time Between Resets Switch Configuration Parameters Configuration InformationSecurity Configuration Parameters Zoning Configuration ParametersHeartbeat LED Activity Hardware InformationFirmware Information Managing Switch Services Please Note Display a List of Switch Configurations Managing Switch ConfigurationsActivate a Switch Configuration Delete a Switch Configuration Copy a Switch ConfigurationModify a Switch Configuration Decimal value, 100-100000 msec Creating the Backup File Back Up and Restore a Switch ConfigurationDownloading the Configuration File Ftp ipaddress user images password images ftp bin Restoring the Configuration FileSetting the Date and Time Paging a SwitchSwitch Configuration Setting the Date and Time List Installing Firmware Resetting a SwitchSwitch Reset Methods Nondisruptive Activation One-Step Firmware InstallationEnter the password for your account name FTP only Wait for the unpack to complete Custom Firmware InstallationDisplay Feature Licenses Managing Switch Feature UpgradesInstall a Feature License Key Page This section describes the following topics Displaying Port InformationYou can display the following port information Arbff Port Configuration ParametersPL-XPL-VC-SG3-22 Port Operational InformationPort Threshold Alarm Configuration Parameters Port Performance FTRJ8524P2BNL Transceiver InformationSet config port Modifying Port Operating CharacteristicsPort Binding SANbox admin-config # set config security port Resetting a PortConfiguring Port Threshold Alarms SANbox admin-config # set config threshold Online Tests for Ports Testing a PortOffline Tests for Ports Display Port Test Results Cancel a Port TestCurrent value Extending Port Transmission DistanceSANbox # show donor Port Config Zoning Configuration Displaying Zoning Database Information Configured Zone Set InformationSANbox # zoning list Active ZoneSet Information Active Zone Set Information Zone Membership Information Zone Set Membership InformationAlias and Alias Membership Information Zoning Modification History E2JBOD2 Zoning Database LimitsConfiguring the Zoning Database SANbox # admin start SANbox admin # config edit Modifying the Zoning Database Removing Inactive Zone Sets, Zones, and Aliases Resetting the Zoning DatabaseCreate a Zone Set Managing Zone SetsDelete a Zone Set Managing Zone Sets consists of the following tasksCopy a Zone Set Rename a Zone SetAdd Zones to a Zone Set Remove Zones from a Zone SetManaging Zones Deactivate a Zone SetCreate a Zone Delete a ZoneCopy a Zone Rename a ZoneAdd Members to a Zone Remove Members from a ZoneCreate an Alias Managing AliasesDelete an Alias Rename an AliasAdd Members to an Alias Copy an AliasRemove Members from an Alias Managing SSL and SSH Services Connection Security ConfigurationTelnetEnabled True / False SSHEnabled Creating an SSL Security Certificate Displaying SSL and SSH ServicesPage Device Security Configuration Displaying Security Database Information Configured Security Set InformationMD5 Active Security Set Information Group Membership Information Security Set Membership InformationSecurity Database Limits Security Database Modification HistorySet Config Security command Configuring the Security DatabaseBefore Reaching the end of the list Modifying the Security Database Resetting the Security DatabaseCreate a Security Set Managing Security SetsDelete a Security Set Rename a Security SetRemove Groups from a Security Set Add Groups to a Security SetActivate a Security Set Deactivate a Security SetCreate a Group Managing GroupsDelete a Group Rename a GroupAdd Members to a Group Copy a GroupRemove Members from a Group Modify a Group MemberRadius Server Configuration Displaying Radius Server Information Configuring a Radius Server on the Switch Page Starting and Stopping Event Logging Event Log ConfigurationDisplaying the Event Log Controlling Messages in the Output Stream Filtering the Event Log DisplayConfigure the Event Log Managing the Event Log ConfigurationRestore the Event Log Configuration Display the Event Log ConfigurationClearing the Event Log Logging to a Remote Host Creating and Downloading a Log File Page You control the Snmp service SNMPEnabled parameters through Managing the Snmp Service12-2 59183-01 a Displaying Snmp Information Modifying the Snmp Configuration SANbox admin # reset snmp Resetting the Snmp ConfigurationPage Access Authority Command ReferenceSyntax and Keywords CommandCommands are listed in alphabetical order as follows Command ListingAuthority AdminSyntax KeywordsSyntax alias AliasKeywords add alias memberlist Copy aliassource aliasdestinationList Delete aliasMembers alias Remove alias memberlistSyntax config ConfigKeywords activate configname Restore Edit confignameSave configname 59183-01 a 13-9 Keywords certificate CreateSupport 59183-01 a 13-11 SANbox admin # create support Following is an example of the Create Certificate commandSyntax date DateKeywords MMDDhhmmCCYY Authority None Syntax exit ExitCloses the Telnet session Authority None FcpingKeywords address Portdestination FctraceHopcount Examples The following is an example of the Fctrace command Syntax feature FeatureAdd licensekey log Keywords add licensekeyFollowing is an example of the Feature Log command Syntax firmware install Firmware Install59183-01 a 13-21 Syntax group GroupISL Group Member Attributes Keywords add groupPort Group Member Attributes MS Group Member Attributes Configures security for attachments to other switchesCopy groupsource groupdestination Create group typeGroup Member Attributes Edit group memberRemove group memberlist Members groupRename groupold groupnew Securitysets groupFollowing is an example of the Group Edit command Following is an example of the Group Members command Following is an example of the Group List commandSyntax hardreset HardresetCommand Help command keywordHelp KeywordFollowing is an example of the History command Re-execute selected commandsHistory HistoryHotreset HotresetImage Keywords cleanupSyntax image Unpack file 13-36 59183-01 a Lip Following is an example of the Lip commandReinitializes the specified loop port Lip portnumberAuthority None Syntax logout LogoutSyntax passwd accountname Keywords accountname PasswdPing ipaddress PingIpaddress Authority None Syntax ps Examples The following is an example of the Ps commandDisplays current system process information Authority None Syntax quit QuitSyntax reset ResetKeywords config configname Factory ServicesPort portlist RadiusWorkstation could lose communication with the switch SwitchSystem ZoningValues Switch Configuration DefaultsParameter 4-Gbps Port Defaults Port Configuration DefaultsPort Threshold Alarm Configuration Defaults Snmp Configuration Defaults Zoning Configuration Defaults11. Services Configuration Defaults 10. Radius Configuration Defaults13. Security Configuration Defaults 12. System Configuration DefaultsKeywords active SecurityClear Limits EditSave Following is an example of the Security History command Following is an example of the Security List command Following is an example of the Security Limits commandSyntax securityset SecuritysetKeywords activate securityset ActiveCreate securityset Copy securitysetsource securitysetdestinationDeactivate Delete securitysetFollowing is an example of the Securityset List command Following is an example of the Securityset Groups commandSyntax set alarm option Set AlarmKeywords option Option can be one of the followingSet beacon state Set BeaconState 14. Port Configuration Parameters Set Config PortKeywords port portnumber Ports portnumberSend Arbff True instead of IDLEs False on the loop 14. Port Configuration Parameters 14. Port Configuration Parameters 59183-01 a 13-65 13-66 59183-01 a Syntax set config security Set Config Security15. Security Configuration Parameters 13-68 59183-01 a 16. Port Binding Configuration Parameters Set Config Security PortbindingSyntax set config switch Set Config Switch17. Switch Configuration Parameters Resource Allocation Timeout Value. The number of millisec Syntax set config threshold Set Config Threshold18. Port Alarm Threshold Parameters Following is an example of the Set Config Threshold command Error rate has fallen below the falling triggerSyntax set config zoning Set Config Zoning19. Zoning Configuration Parameters 59183-01 a 13-75 Set log Set LogArchive Component filterlistDisplay filter Level filter Disables monitoring on all portsMonitors none of the severity levels Specifies all portsStart Alarms are always logged and always displayed on the screenStop Stops logging of eventsKeywords state Set PagebreakSyntax pagebreak state 59183-01 a 13-81 Set Port EnableSet port clear Set port portnumberState state Speed transmissionspeedConfigures Radius servers on the switch Set Setup RadiusSet setup radius Configuration fields20. Radius Service Settings 13-86 59183-01 a Configures services on the switch Set Setup ServicesSyntax set setup services 21. Switch Services Settings21. Switch Services Settings 59183-01 a 13-89 Configures Snmp on the switch Set Setup SnmpSyntax set setup snmp 22. Snmp Configuration Settings22. Snmp Configuration Settings 13-92 59183-01 a Syntax set setup system Set Setup System23. System Configuration Settings 13-94 59183-01 a Admin session Set Switch StateSet switch state state State can be one of the followingSet timezone Set TimezoneAuthority None Syntax Show AboutShow about Show alarm Show AlarmSettings Following is an example of the Show Alarm commandSyntax show broadcast Show BroadcastShow Chassis Displays chassis component status and temperatureShow chassis Displays configuration parameters for one or more ports Show Config PortShow config port portnumber Portnumber13-102 59183-01 a Displays the security database configuration parameters Show Config SecuritySyntax show config security Show config security portbinding portnumber Show Config Security PortbindingDisplays the switch configuration parameters Show Config SwitchSyntax show config switch Displays alarm threshold parameters for the switch Show Config ThresholdSyntax show config threshold Displays zoning configuration parameters for the switch Show Config ZoningSyntax show config zoning Syntax show domains Show DomainsShow donor Show DonorShow fabric Show FabricShow fdmi portwwn Show FdmiPortwwn Question marks ?Following is an example of the Show Fdmi WWN command Displays the status of the active network interfaces Show InterfaceSyntax show interface Show log Show LogNumberofevents ComponentOptions LevelFollowing is an example of the Show Log Level command SettingsFollowing is an example of the Show Log Options command PortDisplays Link State database information Show LsdbShow lsdb Show Media InstalledShow media Portlist25. Transceiver Information 13-120 59183-01 a 59183-01 a 13-121 Show Mem Following is an example of the Show Mem commandDisplays information about memory activity Show mem countShow ns option Show NSOption Following is an example of the Show NS portID command Show Pagebreak Displays the current pagebreak settingSyntax show pagebreak Syntax show perf portlist Show PerfKeywords portlist Byte portlistOutbyte portlist Errors portlistFrame portlist Inframe portlistFollowing is an example of the Show Perf Byte command Show port Show Port26. Show Port Parameters Lipalpdalps LIPF7F7 26. Show Port Parameters 59183-01 a 13-133 Syntax show post log Show Post LogDisplays manufacturing information about the switch Show Setup MfgSyntax show setup mfg Syntax show setup radius Show Setup RadiusDisplays Radius server information Displays switch service status information Show Setup ServicesSyntax show setup services Displays the current Snmp settings Show Setup SnmpSyntax show setup snmp Following is an example of the Show Setup Snmp commandDisplays the current system settings Show Setup SystemSyntax show setup system Show steering domainid Show SteeringDomainid Displays switch operational information Show SwitchShow switch 27. Switch Operational Parameters13-142 59183-01 a Show Timezone Displays the current time zone settingSyntax show timezone Displays all connected devices Show TopologySyntax show topology 59183-01 a 13-145 Show users Show UsersShow Version Syntax shutdown ShutdownTest cancel Test CancelPort portnumber Syntax test port portnumber Test PortOffline loopbacktype Online28. Port Test Parameters 13-152 59183-01 a Test status Test StatusUptime Examples The following is an example of the Uptime commandAuthority None Syntax uptime Syntax user UserKeywords accounts AddFollowing is an example of the User Edit command Following is an example of the User Add commandFollowing is an example of the User List command Following is an example of the User Delete commandWhoami Examples The following is an example of the Whoami commandAuthority None Syntax whoami Syntax zone ZoneKeywords add zone memberlist Copy zonesource zonedestinationMembers zone Delete zoneRemove zone memberlist Rename zoneold zonenewFollowing is an example of the Zone Members command Following is an example of the Zone Zonesets command Syntax zoneset ZonesetRemove zoneset zonelist Delete zonesetRename zonesetold zonesetnew Zones zonesetFollowing is an example of the Zoneset Zones command Following is an example of the Zoneset List commandSyntax zoning ZoningDelete orphans 29. Zoning Database Limits Opens a Zoning Edit session13-168 59183-01 a Following is an example of the Zoning Limits command Following is an example of the Zoning List command Index Index-2 59183-01 a FTP See File Transfer Protocol ExampleIndex-4 59183-01 a 59183-01 a Index-5 Index-6 59183-01 a Set Config Security Port command Show Config Security Port command 59183-01 a Index-9 Index-10 59183-01 a 59183-01 a Index-11